Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11752912
This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Remove Crisper drawers from Bottom Shelf.Remove glass from the top of Bottom Shelf.Drop new Crisper frame center rail into slots on the top of the Bottom Shelf shelf.Replace glass onto the top of the Bottom Shelf.Slide drawers between left and right guides and the Crisper frame center rail.Total repair time less than one minute. No tools required.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Through out broken plastic, replace with new oneto be replaced in a few years.
This is the 2nd time I had have had to replace the center rail in 2 years....
lift glass, slide new rail in replace glass. 2 min repair.
Wife learned you can overload the cheese and fresh veggie trays and the plastic rails broke. Repair required removing parts from the old crisper frame -- no experience and no instructions. Had to study broken part and figure out how to remove parts. Released catches with a knife and, by trial and error, figured out how to install rescued components on new crisper frame with minor damage and frustration.
It was a very simple operation to replace the parts and required essentially no tools, just a small screwdriver to pry up a tab for removal of the chanel on the front edge of the frame. This chanel had to be removed from the old crisper frame and installed in the new one. In addition the crisper control" had to be popped out of the old frame and into the new frame. Most of my time was spent cleaning.
Just pulled out theold and squeezed in the new. I forced it and it went in.
Remove broken parts with philips screw driver (6 screws). Replace encaps while attaching pantry drawer lid. Insert center rail and new drawer.
This took 30 seconds. Lift out shelf glass, remove broken pieces, snap new part into place.
Really easy once I figured out which way the rail went in.I used the repair as an excuse to clean the refrigerator!!
These particular pieces just snap into position. Really could not have been any easier. Just glad I found PartSelect to get needed pieces.
followed instructions that came with part. simple and easy
Just slipped in the new parts. Took seconds.
replaced the part with a new part from partselect. No tools were required
There were no instructions. I had to call maytag after calling you for information. The pieces I ordered from you after speaking with you was not exactly a perfect fit but I made it work. Can't believe my appliance is falling apart
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.