MFI2568AES Maytag Refrigerator - Instructions

Removed drawers from fridge, removed screws/bolts from end cap, removed end cap with busted hinge pin,installed new end cap with lid , replaced drawers

to repair the center rail, all I did was remove the food and the top glass and insert the rail!!! to repair the end cap all I did was remove the big drawer and remove the broken end cap and replace with the new one. My only thought is this is the third end cap I have had to replace not very sturdy construction where the lid hangs

Remove the vegetable and fruit drawers. Cover of the pantry was off due to the broken pin. Remove the three nuts with a nut driver. Lift up on the old end cap to remove and replace it with the new one. Replace the nuts and put the cover back on. Replace the two drawers and you are done. Repair was easy

Opened the refrigerator door, pulled down the filter cover, twisted the old one out and removed it. Placed the new one in - twisted it into place, replaced the cover and closed the door. It is working great!!

Easy as 1-2-3. Snaps right on. Just a little windex to clean the empty shelf!

Removed the drawer you need 1/4 socket removed three bolts very easy took me 15 minute

There are two screws that holds the panel on. I took the screws out pulled the panel and attachments out. Removed the attachments from the old panel put them on the new panel. It was really easy to figure out how to fit the pieces back together. Screwed the panel and attachments back into to place and perfect. I Put the door back on the deli tray. No readjusting was necessary at all good as new fits great no problems. You pull the tray out the door flips up every thing works fine.

Nutdriver....removed crispers.......pulled drawer. While drawer slide pulled out...removed 1 screw. Removed second screw. After looking at new on I understood had to pull up a bit while removing to clear taps at front and back.I am a handy kinda fella that fixes everything tho"

easy as pie took about half hour. took drawers out, glass shelves, 2 screws, Reversed process to reimstall.

I popped the broken panel out and installed the replacement.

Ordered new part received it quick. Removed two nuts to remove old pantry side. remove drawer slide from old part and replace on new part. Re-attach pantry end cap. replace glass and brackets reinstall drawer? Done! really simple. Instructions on web site and with new part.

The repair was very straight-forward with using a socket set to remove the side panel and replace it. This also gave be a chance to give the refrig a good cleaning:) I was a bit worried about "popping" the cover in place, but it went in smoothly. I have decided that one of the causes of the breakage was lifting the cover manually and not allowing it to open automatically as the veggie drawer was opened. Hopefully, this will prevent future issues. I'm SO glad I found your site and will definitely use it again and refer friends!

Placed in window and pulled out sliders.