Models > MFI2568AES Maytag > Instructions

MFI2568AES Maytag Refrigerator - Instructions

All installation instructions for MFI2568AES parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the MFI2568AES
541-542 of 542
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cover to bottom bin would not stay secured. broken plastic support pin

  • Customer: RAY from HOUSTON TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Removed Left side support with broken pin (3 small hex head bolts). Replaced with new support with pin in place. Note behind: I broke the pin trying to replace the cover. Now I know to flex back the side to the cover, and not flex the pin which broke. This cost me 25 bucks and one hour, saving me from a probable $300 dollar charge. THANKS, PARTS SELECT!!!!!

Front ice maker display flashing and ice maker door flapping open and closed.

  • Customer: John from Fillmore CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
1. Unplugged refrigerator

2. Removed rear silver stainless steel panel on the right rear side of the refrigerator (if you are standing in front of the unit) using a small socket set. The panel is vertically located in center at the rear of the refrigerator.

4. Removed plastic cover over the HV controller board.

5. Unplugged 4 molex connectors attached to the board and carefully pushed on the plastic release locks that hold the board in place as not to break them and removed the HV controller board.

6. Inerted the new HV controller board and plugged in the molex connectors. All molex connectors are of unique size and will only attach to the HV controller board in one location.

7. Replaced plastic cover over HV controller board and attached stainless steel panel with a small socket set.

8. Plugged in the refrigerator.

9. Identified programming code inside the refrigerator.

10. Followed included instructions to enter program code to activate refrigerator front panel.
All Instructions for the MFI2568AES
541-542 of 542