KUDY24SEAL5 KitchenAid Dishwasher - Instructions

Unscrewed the retaining screw on the old one, popped the new part onto the upper basket and I was done! The new part does not require a screw to retain it. The pivot is angled to allow the spray bar to clear the basket as the arm rotates. Remember to install the part correctly to allow rotation.

Shut off water supplyand removed front cover below door. Remove flexable water line (wrench set), valve and bracket (nutdriver), and input hose (pliers). Installed flexable line on valve, replaced input hose on valve, then installed valve and bracket. Found screen on input to valve almost completely blocked with buildup of materail. Replaced front cover. result, bright, clean dished.

Yes, it's true, I broke my own dishwasher. I had loaded it and the door wouldn't quite shut all the way. I opened and inspected it to see what was blocking the door from closing. Didn't see a thing. So, the next time I shut the door I pushed a little too hard and snap. In a panic, I immediately searched for the parts to get it fixed. (Because I sure didn't want to hand wash my dishes....SPOILED!) I went to Part Select and found the parts quickly. They were shipped in a very timely manner and the installation was super easy. I absolutely love the fact that a video is provided! Super tool! I another part is needed, I will most certainly be utilizing Part Select! Thank you!

My husband repaired it by taking of the door, and replacing the lower door gasket you provided, saving about a $50 repair bill. Blessings, dear folks.

screw it in then hook up the hose.

checked out the video followed his instructions. done in no time. very happy. Repair guy would have cost 5 times more

An easy job. One spring was broken, but I replaced both while I was at it. Take off the two lower front panels by undoing the retaining screws accessible from the front of the dishwasher. With the door closed, you can see the brackets attached to the door on either side, with a hole at the end of each for the spring. The base of the dishwasher frame has a toothed rack to take the other end of the spring. The further back you put the spring on the rack, the more tension you have on the spring(s) to keep the door closed. Hooking the spring first on the door bracket and then on the base rack, with a bit of muscle (but not too much needed), completes the repair. The longer straight end of the spring attaches to the door, the shorter straight end to the rack. Check on the door opening and closing, to make sure the tension is satisfactory, before reattaching the panels.

Note location of old part. Removed old part. New part snapped in place without any screw. Old mating part screwed into bottom of new part with one screw.

I removed the upper spray arm using a nut driver and noticed that the upper spray arm mound was broken causing the spray arm to hit the side of the tray. It was easy to snap the old one off. I ordered a new spray arm kit and the upper arm mount. They came the next day and I installed it in 5 minutes. I put the mount on first (it clicked into place) and the rear support bracket. I screwed the new spray arm on to the bracket from the bottom.

First, I watched the repair video supplied by PartSelect! That video service is a Godsend and made the actual repair so easy! I was able to repair the dishwasher myself without the aid of my husband. Also, I was most pleased that I received the part inside of 48 hours of ordering it! I would not hesitate a moment before ordering any other repair parts from PartSelect!!

Spray arm broke when upper rack was closed with a item that was too tall, one screw removed the assembly and the new parts just snapped together, very easy repair.

Removed the upper rack. Two screws removed from upper spray arm mount. Snapped in new mount. Backwards once ( should cant away from deep end of upper rack). Replaced screw at end of mount: done!

Watched the video. Followed the steps exactly. Great tool.

A quick Google search brought up PartSelect. The costs were reasonable, the parts lists made it easy to find the make, model and parts I would need to complete the repair. A short wait for shipping, delivered in the time stated and safely packaged all parts snapped in as directed. PartSelect will be my first stop for any appliance parts.

Found the part # from the sprayer arm (manifold) and the mount clip and received the parts the next day, and repaired the problem. We were initially prepared to purchase a new dishwasher, however this repair allowed us time to research the best model for us and allow for better coordination of appliances. We bought time for a $25 part expenditure. It was great.