All Installation Instructions for Jenn-Air Wall Oven JEW8527AAW

Oven have F2 and F3 codes following cleaning cycle making oven inoperable

Remove 2 screws in upper left corner of stove holding sensor in place. Pull sensor out and disconnect plastic electrical connector. Select appropriate adapter (both styles provided with new part) & reinstall. Power up stove and select bake on control unit to test. Works like a charm!

Parts Used:

Long Oven Sensor

Light Bulb - 40W

Timothy from Longmeadow, MA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Range had an F-2 code on the control panel

I removed the old thermostat and replaced it with the new one using the supplied wiring adapter for my model of range. Parts Select made this an easy project. Thanksyou

Parts Used:

Long Oven Sensor

Greg from Frederick, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Oven would overheat

Followed directions as supplied. New part did not work, so it must be in the control unit which is no longer available. So time for a new range.

Parts Used:

Long Oven Sensor

MARK from roseville, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Door Hinge broken

I followed the online video at Jennair.com. The repair was easy and I saved quite a bit of money. I was quoted a price of $534.00 to replace the door hinges, I did it for $96.00 including overnight shipping chargers. I am a very happy lady.

Parts Used:

Door Hinge

Antonio from Davie, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The oven clock didn't light up and the door didn't shut properly.

Just followed the directions given in the videos provided, and the repair went smoothly. It's wonderful to have the clock function back and the door shutting well. I see some concerns on the web site about the oven light not going out. Our oven door never did shut real tight when it was new, but if you shut it firmly, the light goes out and stays out until you open it again. I feel like I have a brand new oven again!!

Parts Used:

Door Hinge