HDA2000F02WH Hotpoint Dishwasher - Instructions

Removed broken axle. Replaced axle. Attached wheels

By GE dishwasher badly leaked under load. I was about to shop for new dishwasher ($400 ?) when I had found your website. With likely reason identified, inexpensive parts readily available and video instructions being very clear, I had decided to try to fix my dishwasher myself. Parts arrived on schedule and I had replaced my old corner baffles in 1 minute with no tools at all. It fixed the problem with my dishwasher with minimal trouble for me for less than $30. Thank you.

Immediately shut off water supply to the washer. After ordering and receipt ot part: Removed base panel, turned off power, disconnected wire, water supply line and screws attaching washer to kitchen counter. Pulled the washer out and turned it on its side with the valve on top. Removed and replaced the valve, returned the washer to the upright position, pushed it back under the counter, reconnected all services, screws to counter and base panel, turned on the water and power. Took two hours since I needed take a trip to the hardware store to replace a right angle water fitting .

Researched the repair solution online, ordered the part from Parts Select that was way less expensive then the manufacture and 2 other parts sites. Very easy to fix. Saved $$$ and time! Love It

Replays the wheel

Watched the how to video, ordered part, part arrived 5 days later. Popped out end caps. Took out rack, replaced wheels and boom less than a minute later it was fixed. Now my kids can do the dishes safely. Momma has a way out of doing dishes now.

Original parts broke off at the wheels and wouldn't stay attached to the basket when pulled out for use...replacement was simple strait forward...remove the old, and on with the new.

Insert the piece into wheel and snap on lower rack of dishwasher. Thank you to parts select for such fabulous service and quick delivery and fair price.

Had just a little trouble getting the end caps of the the runner bars after that it was a breeze, I am a 55 year old woman and done the job by myself

I watched the video before ordering to ensure I had the right parts. I simply followed the video. So easy! And for less than $20, the dishwasher is repaired. The upper rack was such a hassle, I was considering getting rid of the dishwasher! So glad I found your site.

just lifted out the old one & replaced it with the new one. Couldn't have been easier.

The hardest part about this is removing the end caps. I had repaired the wheels a long time ago so I had some idea about how to do it. Bending the back of the end cap very slightly and twisting got them out. Then it was simply a matter of switching the racks, which came with its own wheels, and then putting the end caps back on.

Before you due anything else...remove the water inlet valve, remove the 4 screws holding the water inlet coupling to the valve housing, remove the nylon filter (tight fit), and clean the debris from the filter. Re insert the filter, reassemble the valve housing and check for leaks. Clears most water flow problems.

Ordered the part from you and it was easy to replace.

Too easy- what made it easier was this is a portable roll-around unit I could lay on it's back. Loosen the two clamps around the washer pump, hook up the drain solenoid, washer motor wires, attach the motor hanger, that's basically it. It took longer to make sure I was working from the right set of instructions- this pump covers several models. Once I had that right, it was really a snap. Now the unit is so quiet. It once sounded like a jet engine in the kitchen, now it runs so quiet you can hear the water splashing around inside- a big improvement. We should be able to hang onto this thing for a while longer.