BBB A-Plus

Lower Front Dishrack Wheel

PartSelect Number PS259136

This wheel is located on the front lower rack. It is sold individually and comes with the attaching axle.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $11.72

  • You Save

    $1.95

  • Your Price

    $9.77
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lower Rear Rack Wheel and Axle Kit

Part Number 1993855

This kit contains one wheel and one axle. It is designed for the rear lower dishrack. Sold individually. Order quantity needed.
$9.98
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 1-15 of 46

 

27 of 30 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

Customermichael from perry hall MD

Wheel replacement

Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRussell from Pueblo CO

Front twoo rack rollers broken ,bottom rack roller broken

for the top rollers you must remove thethe end cap. this was easy ,i placed a block of wood on the outside .placed the punch on the inside where the channel is pushed in to hold cap on. smacked it till it was pushed out far enough to remove end cap. new rollers simply snap on. very easy,

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsScrew drivers, Wrench set

CustomerSkott from Mason OH

Dishwasher leaking at rubber connector - pump wash arm

First removed dishwaser from under counter so I could get to rubber connecter. It is located in center under dishwasher. I first needed to unscrew with wrench rubber connection at pump and and then the complete piece unscewed by hand from pump wash arm. I then just had to screw new rubber connector back on to bottom of dishwasher and re-attached at the pump. It was very easy to replace the rubber connector. I also replaced the dishwasher sump housing because it was made of same rubbber material and feared it was deteriorating also. I had to unscrew with wrench at pump as well and it just popped out from inside dishwasher after unscrewing screen inside dishwaser. Popped new piece in and screwed screen back on and reconnected underneath dishwasher back to pump. The rack roller wheel just popped right on. FYI: The wheel is actually 1.75 inches in diameter not 2 inches. I was worried it might be too big if it where 2 inches but it was the same size as the other wheels which was 1.75 inches. The hardest part of this job was getting the dishwasher in and out from under the counter. The good news is that most of these parts are standard and the replacement parts fit perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerReginald from Hamilton NJ

Rollers broke off from bottom rack of dishwasher

Went to www.PartSelect.com. Part was easy to locate online with GE model number and illustraion online. They shipped the parts in two days and I put the new parts on by hand. Saved a $135 service call from GE. One part came in broken from the factory. Upon calling customer servce, PartSelect sent out a replacement part the next day - no problem. Great service, would be happy to use again - Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerJOHN from PURCELLVILLE VA

Wheels were worn out and kept falling off

popped old wheel off popped new one on
for the rack roller i took the ends off and slid old rollers off then slid new ones on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFelix A from Orlando FL

Missing wheels

Inserted wheels on socket and then into the dishwasher rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerShoji from Arlington MA

Missing wheels on lower dish rack

Very simple repair: assemble the wheel/clip assembly. Attach to lower dish rack.

I was very happy with the fast delivery by PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDiane from Barstow CA

The 2 right front wheels of the bottom dish rack were broken and/or missing.

It really was very simple. The parts just snapped together and then snapped into place on the rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrian from Wenonah NJ

The wheels on the lower dishrack were shot from over a decade of use.

Ordered the wheels from PartSelect.com, they were delivered the next day and I simply attached them to the dishrack. No tools needed for this repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Ballston Spa NY

Missing lower rack wheels

The repair was as simple as it could be. The real story is being able to find and replace the missing wheels. Your website makes it real simple to find the proper parts, order them and receive them in a few days. Your parts person; Jason was very nice to send me a little note concerning my order. I appreciate that personal touch. I will be a regular customer with that kind of service. Well done/Good Job.
Bill

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKim from Indianapolis IN

The latch on the wheel broke

I took it out of the package and snapped it on the drawer and slide it back in the dishwasher. The part cost way to much but it was worth it to continue to use my dishwasher

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSharon from Southlake TX

Our labrador puppy chewed a dishwasher roller!

The new roller easily clipped together and then clipped into place on the lower dishwasher rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJulie from Maumee OH

Wheel broken off bottom rack

Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStephen from Hilton Head Island SC

The original lower rack rollers (front) were worn out.

Installation of the two new lower rack rollers was extremely easy. Simply aligning each of the new rollers and pressing them into place completed the task in a few seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

    • Lower Front Dishrack Wheel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLloyd from The Villages FL

Rollers fell off lower rack of dishwasher.

First removed four old wheels. then attached four new wheels to lower rack by pressing into slots.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 1-15 of 46