Models > HDA2000-01 > Instructions

HDA2000-01 Hotpoint Dishwasher - Instructions

All Instructions for the HDA2000-01
541 - 555 of 589
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Roller wheels in upper rack wore out
The switch out was quick and super easy. I had the top rack off, wheels changed out and rack back in in ten minutes
Parts Used:
Upper Roller and Axle - Kit of 4
  • Bill from Seattle, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leak on the bottom right side of the door
replaced the rubber baffle
Parts Used:
Corner Tub Baffle - Lower Left Corner Tub Baffle - Lower Right
  • Daniel from Oakland Gardens, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishes not getting clean
I watched and read what other people did with the same problem and bought the part they did and installed the part which was real easy and the dishwasher works great.thank you to everyone that left information.
Parts Used:
Motor and Pump Kit Water Inlet Valve
  • Jim from Burns, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
one roller was broken
replaced all four rollers
Parts Used:
Upper Roller and Axle - Kit of 4
  • Fred from Pueblo West, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old rinse aid fill cap broke off at base
I removed the broken stub of the old fill cap with a screw remover. This was the only part that wasn't easy. The new cap fit fine.
Parts Used:
Rinse Aid Fill Cap
  • John from Corvallis, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
top rack falling
watched video on website - very easy repair
Parts Used:
Upper Roller and Axle - Kit of 4 RACK SLIDE END CAP
  • Bernadette from Contreras, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher very noisy when washing/rinsing
Dishwasher had become noisier & noisier in last year during wash & rinse cycles. After looking at various web sites, decided to first pull motor/pump & try cleaning it out. That made no difference. Also looked for anything loose that could cause vibration. No change in operation. Decided to go for replacing motor/pump & found Part Select had best price. Part came next day! I was amazed! Looked at video, then removed old unit and attached new one. Easy because it was exactly same connections. Ran dishwasher and it sounded 100% quieter - like when new! Very happy!!
Parts Used:
Motor and Pump Kit
  • Tim from Alpharetta, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaked badly when running
At first, I found a metal band that was rusted and loose, replaced it but still had a leak. I went to the diagnosis section and identified another area of problem, ordered the part and got super quick delivery. With the help my wife I was able to pull apart, repair and get the unit to run and stay dry. Wife is happy because she loves the décor of our old but now dry dishwasher.
Parts Used:
Impeller and Seal Kit
  • Kenneth from Lake Bluff, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
broken rollers
within 5 minutes.Great site for information and parts
Parts Used:
Upper Roller and Axle - Kit of 4
  • Bruce from Souderton, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making lots of noise, and specifically rattling
The repair went really smoothly, I found a video on youtube for how to remove the dishwasher, and the video on the parts page did a great job covering replacing the motor. The repair went really well. As others have noted, it ran really nosily the 1st time, and a little the 2nd. After that, it ran quieter, and stronger than it has in the 4 years we have owned the house.
Parts Used:
Motor and Pump Kit
  • Brent from Fort Collins, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
installing new wheels on upper rack of dishwasher
I thought to myself, this is going to be easy, but I hit a couple bumps getting the end caps off. I just watched the video and it was great and helped me be sucessful. The only thing that would have helped was instructions on how to put the end caps back on! david
Parts Used:
Upper Roller and Axle - Kit of 4
  • David M from Bonita Springs, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The axle rusted through on top tray of tray
Removed the tray from its rails. Removed axle clips fro tray and replaced with new axles. Put tray back in rails and I was done. Works like
Parts Used:
Upper Roller and Axle - Kit of 4
  • william from Canal Winchester, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
miss wheels
It was amazingly easy repair. I just order the correct parts from “PartSelect” and installed them and done. It was fixed.
Parts Used:
Lower Rack Wheel Kit - 8 Pack
  • Martha from Fort Worth, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water keaking fron tip of dishwasher around the showerhose
Laid dishwasher on its side to get to the bottom very easily, unscrew the screw that was holding the bottom of the hose to the dishwasher, then remove the 2 screws in the top of dishwasher that is holding the shower hose in placeinstall new hose in reverse, very easy .
Parts Used:
Upper Spray Arm Water Supply Hose
  • Richard from Shreveport, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Lower dishwasher wheels broken/ deteriorated.
Ordered parts from Parts Select, and replaced lower roller wheels. The diagrams/ drawings were key in ordering the correct replacement parts - thanks
Parts Used:
Lower Front Dishrack Wheel
  • Stephen from Madison, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the HDA2000-01
541 - 555 of 589
Back to Top