FEF352AWE Frigidaire Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
element broke
-
joseph s from eureka, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The heating element burnt itself in half.
I removed the old heating element, ordered a new one and replaced it with the new elemnt. Sounds super easy, however, when I removed the old element the wire holding the left prong slipped through the hole into the back of the oven. I had to remove the back of the stove and feed the wire back through, hold it in place with an adjustable wrench while attaching the new elemnent. Hardest part? Plugging the stove back in!! Not the easiest thing when you're a small woman with short arms (which is me). :)
Parts Used:
-
Shelly from Grimes, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Burned out bake (lower) element
I just followed the video. Unplug the stove, undo two screws holding the element, pull it out to get to the terminals, pull off the electrical terminals, connect the terminals to the new element, push back in the new element, replace the screws, plug in the stove and set the clock. It did not take even five minutes from start to finish. You will need a flashlight to see as the oven light doesn't come on while the stove is unplugged!
Parts Used:
-
Richard from Wilmington, DE
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
burner burned out
-
Charles from Kettlersville, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Only problem was not having the correct tools already on hand
My oven went out the day before Christmas. After calling around and getting high quotes from several 24/7 repairmen I decided to do the repair myself. I searched YouTube and found the video from PartSelect on how to repair my oven and decided to order my part. Due to the holidays there was a shipping delay but once I got the replacement part it was easy to repair. Just make sure that you are aware of the tools needed to do your repair. You save a LOT of time that way. My repair probably would have taken me only 30 mins but it took over 2 hrs due to 2 trips to the hardware store.
Parts Used:
-
Dawne from Oakland, CA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken rear door glide
Emptied the drawer of storage items. Removed the drawer and attached the new rear drawer glide. Replaced the door in the range and refilled the drawer.
Parts Used:
-
Amy from Ocala, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
one rear and one front glide missing
Just moved into this house and inherited the oven so I don't know how old it is but I had to put something down in order to submit this review. Popping the glides in place took seconds. I am amazed that I found the parts so easily online and that they arrived so quickly. Usually the simplest of things turns into a time consuming project for me. Thank you!
Parts Used:
-
Rod from Spencer, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
lower element burnt out
using a screwdriver and nut driver I installed new element after shutting off electricity at fuse box. fit easily. works great. Drawer glides were broken and I installed two of these as well. Easy. Works great too.
Parts Used:
-
James from Delavan, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
oven element burned out
removed the two screws holding the element in place, pulled the wire connectios off of each end, reversed the procedure and whala!! what an easy task, and I was just about ready to spend $556 dollars to buy a new stove, this part cost $23 dollars.
Parts Used:
-
Robin from Roseland, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
bake element burnt out
I unscrewed the two 1/4 in. nuts and disconnected both sides. I then reconnected the new element. Works great. Great price and fast shipping.
Parts Used:
-
David from burleson, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
inside oven glass had cracked.
I got the ex husband to come over and take it apart and fix it, he said that it was a really easy repair to complete.
Parts Used:
-
KAREN from INDIANAPOLIS, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Switch was sparking
Took back cover off 2 screws held the switch then moved wires one at a time from old switch to the new one put everything back plugged in stove everything worked
Parts Used:
-
Marshall from Newport,, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the lower replaced
to install the element was somewhat easy but turn the oven on there is no heat either on the upper or replaced element the light on the range shows it workings so it no doubt has an internal problem that will require a electrician in order to locate the problem due to the noise that i heard when the element went out-i am not surprised that it needs other work
Parts Used:
-
Madeline from Myrtle Beach, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
rear drawer glide broken
rec'd rear drawer glide 2 days after ordering opened package removed from wrappers snapped in place put drawer back in
took nearly 2 minutes to complete 1 1/2 of which was opening packages if you add ten minutes to find and order still under 15 minutes total have used this company before and will use any time something like this is needed. rebuilt my 18 year old dryer motor belts lint filter saved money and got a "new" but old quality maytag same with washer easy to order. quality help if or when needed speedy delivery keep them in business please
took nearly 2 minutes to complete 1 1/2 of which was opening packages if you add ten minutes to find and order still under 15 minutes total have used this company before and will use any time something like this is needed. rebuilt my 18 year old dryer motor belts lint filter saved money and got a "new" but old quality maytag same with washer easy to order. quality help if or when needed speedy delivery keep them in business please
Parts Used:
-
william from hagerstown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Burned out element
The DIY video on the PartSelect website was very useful as it showed how to do the repair without taking the panel off the whole back of the stove. It was a very simple repair being armed with the knowledge shown in the video.
Parts Used:
-
David from Mountain rest, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!