EDW3000G01WW General Electric Dishwasher - Instructions

This repoair was needed due to diswasher leaking out of side door. I just moved in about 6 months ago and needed to use dishwasher. When it leaked i noticed it was in need of a gasket. I searched the internet and came accross "part select". Part showed up in less than 3 days and was a breeze to install. The original gasket came out just by pulling, cleaned up channel and installed new gasket.slid in real easy. I did take off inner door panel to inspect for any damage. none noted. Perfect fit first time. Dont get confused folks if the part has another name as some parts are interchangeable in the industry.

Removed old pump and replaced. Did not want to wait 2-3 weeks for a repair person

I was able to fix without tools. Thanks ray

Broken wheel fell off and landed on heating element, burning it and rendering it useless. Ordered new wheel from PartSelect including new axle, and installed on rack. PartSelect.com is an outstanding repair parts website! Excellent diagrams, video tutorials and great price and delivery. I am more than satisfied!

it took all of minutes to slip in place i will let everyone know about this site thank you again.

I removed the old cap and put on the new cap.

Removed the old rack and slid in the new rack.

Replace all four upper basket rollers as well as the slide rail end caps.

After some investigation on the internet and partselect.com, ordered and replaced the piston and nut assembly inside the back of the dishwasher and the problem was fixed.

Took old ones off, put new ones on. It took longer to open the box

Yours guys are the best I received the parts next day thanks

First, remove the bottom front covers (two parts four screws). Second, remove the two screws at the top that secure the dishwasher to the counter. Third, gently pull away the dishwasher from underneath the counter just far enough to see and be able to remove the door spring(s) - one on each side. Fourth, remove the existing hinge arm link(s) if not already broken off, replace with the new one(s). Note that the door hinge goes on the door (front) side of the spring and the other side fits into a groove on the door arm - the other end of the spring attaches to one of the 3 available holes on the frame at the bottom. It would be a good idea to replace the hinge arm links on both sides even if only one is broken. Make sure that the door has the right tension (each spring can be hooked in 1 of 3 holes to adjust the tension). Then gently push the dishwasher back under the counter. Finally, replace the screws under the counter and replace the covers on the bottom front. All of this should take no more than 15-20 minutes. This was an easy job!

Pop off End Caps with pliers. Slide Upper Dish Rack out of dishwasher. Pop off "interior" End Caps with pliers. Slide out Upper Rack Slides. Slide in new Upper Rack Slide just past second roller guide snap on new End Caps. Slide upper dish rack back into place. Snap on new End Caps.

The top rack needed to be replaced as the wheels had broken. I ordered wheels but then found that the rack had broken and the wheels would not work so I ordered a new rack. I popped off the end caps on the slides with pliers. I pulled the old rack out and slide the new rack on. Very easy. I am very happy with the way everything went with the order from Parts Select to the installation. I ordered the rack at 5 pm on the 14th and I got it on the 16th. Very good service on that and also on a return problem that they took care of.

Remove the upper rack. Removed rail end caps. Removed old broken wheels. Only reason I needed pliers was that one wheel was stuck from old age. Snapped the new wheels on easily. Installed new end cap. Good as new. Great delivery speed of parts. Thanks.