CWEF312GSB Crosley Range - Instructions

Pulled stove away from the wall and unplugged it. Removed probe and cut the wires because the connection clip on the new probe was different from the original. Leave the wires as long as possible because you will need the extra length to splice the clip from the old probe to the wires on the new one. Replaced probe and plugged the oven back in. Done.

Large burner would cycle on and off per temp setting a few times. Then it would stick on high. Read other problems people had with the burner switch, which helped to determine the problem. Instillation per video was pretty straight forward; but the issue I ran into was when pulling off the wires from old switch, there was a short wire which connected to the indicator light. The abrupt release yanked the wire which caused the lens indicator to snap. So, when you are repairing the switch, be aware if there is enough slack in the wires to prevent that issue

My husband said it was easy he just unscrewed the two bolts he was through in no time. Thanks so much. I am so glad my over is working, it had been out for 8 month I am so glad my co-worker told me about you all.

Replaced the bottom element in the oven. Had to remove the 2 screws holding the element in place. Gently pulled the element loose and disconnected it from the wires connected to the oven. Connected new element to the 2 oven wires. Gently pushed the new element into the holes of the oven. Replaced the screws and I was done

Using a socket set, I unscrewed the original/broken heating coil from the back wall of the oven. I gently removed the screws holding the element in place and slid out the connecting wires from inside the oven wall. Then, I detached the wires from the original heating element and attached them to the new one. I slid the wires back into the oven wall, screwed the new element in place making sure both screws were tight, that's it!

Removed the upper panel on back of range with a nut driver, removed 4 screws to take out clock timer, removed wire connectors from old click timer and removed it. Gently removed cover from front of old timer and adhered to new timer. Placed new timer in with 4 screws and attached wire connectors. Replaced back panel and plugged range in, everything works great. Very easy, saved a lot of money!

Took 2 screws out pulled element forward, unhooked the two clipped on wires. Reattached wires on to new element pushed back into stove put the 2 screws make in, DONE! Really easy cheap fix thank you for the fast shipping and easy to do with video instuctions available item.

Just pushed the stove to the front unplugged it and unscrewed the old coil and connected the new one. It was very easy to do. I had ordered the same part last year from this company and kept the invoice so I knew exactly what I had to order. I use my oven quite alot so I guess that is why the bottom coil keeps burning out. Thank you for your quick shipping!!! I am one happy customer with a working oven once again.

Fortunately the bird was completely done. I viewed the video on replacing the part , and ordered it that night. It shipped in a resonable amount of time , and was a breeze to install. I'll continue to purchase from your company when needed, Thank You, Tim M. Delaware

The repair was easy.it took only minutes to install.The how to video was a big help.thank you parts select!

Removed the door and carefully dismantled all of the layers. In my particular situation, I needed to do some high heat painting as over the years the white panels had discolored due to heat. So, I had to wait a day or so for the painted panels to dry--but they looked great when done. Some words of caution, really look the diagrams over and be sure you are ordering the correct glass (there are three and all different). I initially ordered the wrong one but used it anyway as it replaced a badly stained one. But, I had to re-order the correct glass. It was amazing how quickly I got both orders, though. Only took a couple of days!! So, am very pleased with the way it looks--like new again and quite easy if done systematically!

I order my new part from you, I was very please with your severice,.... Great prices and next day delievery... Thank you so much When I need parts for anything I will be back,,,, Thank you .... Tammy

Inserted the new rear drawer glides

the rear glides were missing on the back of the drawer so the drawer would pull out but when pulled back in, would tip down and not catch on anything. I ordered the parts then found an instructional youtube and watched it. Easy repair, cheap!

I removed two screws from inside the oven and pulled out the broken element and replaced with new one in just a few minutes,it was so simple!