CSM26MRDAWW Hotpoint Refrigerator - Instructions

The adapter made the cord a bit long but other than that it was great!!!

I took everything off the shelf,removed the shelf and broken slide.Removed the two philips head screws.Replaced the shelf slide and screwed it in.

I watched the video from the link that was sent to me with the shipping notice. It was very easy to understand. I had no trouble at all. I'm 75 years old woman, however, and I can fix about anything. Don't be afraid to fix appliances yourself if you feel you have the knowledge.

As suggested by your web site. Thanks. BC

Simple. Take off back panel, locate relay on side of compressor tank, remove, replace.... cold air. Unit would run, but only blow warm air. Relay will rattle when you shake it if it is bad. New relay makes no noise when shaken.

Replaced parts-- put back same way it was taken apart--job was easy

I am not a very handy with tools. I called a repairmen and theharged me $50 to look at refrigerator/freezer. He told it needed a Defrost Heater and bracket assembly. He said it would cost with the service charge $220.00. So I went to Refrigerator parts web page and that is where I found PARTSELECT Web site. I order the part for a lot less then repair shop would have charged. It was pretty easy to install since it was just a couple of screws and bolts. Thanks to PartSelect.

Instructions that came with the part were useless. I would have created new problems if I had attempted to follow the instructions. However, once I had the old part removed and put it beside the new part, required repair process was obvious, easy and quick. Frig now makes ice better than it ever did.

Replaced Valve - really easy repair -- longest part was getting fiber cover plate off and on back of refrigerator

That happened before, it was the module time delay,had a spare so i changed, still no water out,i checked the water supply,changed filters,determined the water valve was not opening, so i ordered the water valve from partselect.GE and partselect should sell the water valve replacement part with the nuts and sleeve,because the threads count on the pipes out of the water valve are not standard sae 20 threads per inch, hard to find in local hardware.

I followed thevideo. It was very straight forward.

Part received in two days,installed in 5 minutes.Thank you.

Removed top hinge cover and screws. Lifted door off bottom hinge and replaced bottom hinge assembly.

I'm a housewife in her late 40's. Before ordering the part, I watched your video on how to remove and install the new icemaker. First I unplugged the refrigerator. After a few minutes, I unplugged the icemaker and unscrewed it. I lifted it a bit and removed it. I did not use the icecup that comes with the part. Instead I removed the one from the old part and inserted it to the new one. Then I plugged in the new icemaker, placed it inside so as to match the holes and screwed it in. YES, it was that simple. It took me less than 10 minutes to do this. I saved myself over $100!!

I watched your video on the repair twice and then did the repair. . . Your video was a major help and the only reason I decided to do the repair myself. . . The video was excellent and gave m e info on every detail of the repair. . . . . Thanks