Models > ATW4475TQ0 > Parts

ATW4475TQ0 Admiral Washer - Parts

All parts for the Admiral Washer ATW4475TQ0

Below is a list of all parts for the Admiral Washer ATW4475TQ0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ATW4475TQ0
29-42 of 187
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Timer - 60 Hz

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.


Water Level Pressure Switch

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.


Oil Seal Kit for Gearcase Input Shaft

This two piece oil seal kit comes in two pieces and is used for the gearcase input shaft of your washer.


Spin Pinion Seal

This seal is for the top of basket drive tube shaft.


Spring Outer Bracket



This screw is sold individually.


Agitator Cam Bearing



Sold individually.


Break Hose

This hose goes from valve to inlet.


Lid Bumper

This gray and white washer lid bumper contains a rubber bottom and is sold individually.


Hose Clamp

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.


2-Speed Drive Motor - 60Hz 120V

The drum is driven directly by the motor, replacing the usual belt or gearbox-driven system which increases noise and decreases efficiency.


Temperature Switch - 4 Positions

This part regulates the temperature of the water in the tub.


Gearcase Cover Seal

This part prevents the agitator shaft from leaking oil onto the transmission.

All Parts for the ATW4475TQ0
29-42 of 187