Models > ATW4475TQ0 > Parts

ATW4475TQ0 Admiral Washer - Parts

All parts for the Admiral Washer ATW4475TQ0

Below is a list of all parts for the Admiral Washer ATW4475TQ0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ATW4475TQ0
43-56 of 187
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Break Hose

This hose goes from valve to inlet.


Water Level Pressure Switch

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.


Tub Ring Seal

For upper outer tub ring assembly.


Rear Leveling Foot

Sold Individually. Used to help stabilize the appliance on uneven surfaces.


Motor Capacitor

This part gets the motor up to speed quickly before transferring power to the run capacitor.


Gearcase Oil

This gearcase oil comes in a 16 Oz bottle.


Washer Outer Tub

This part holds the water during the wash cycle and houses the spin basket.


Gear and Pinion Kit

This gear and pinion kit is used inside the gearcase of many washing machines.


Centerpost Bearing and Seal Assembly

This assembly comes with two center post bearings and two seals, and three agitator shaft seals.


Retainer, Motor (2)

This part is sold individually.


Upper Agitator


Power Supply Cord Kit




Spin Tube "T" Bearing

All Parts for the ATW4475TQ0
43-56 of 187