Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ATW4475TQ0 > Parts

ATW4475TQ0 Admiral Washer - Parts

All parts for the Admiral Washer ATW4475TQ0

Below is a list of all parts for the Admiral Washer ATW4475TQ0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ATW4475TQ0
15-28 of 187
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Hose Clamp

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air...

$58.14

Water Inlet Valve and Thermistor Assembly

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

$4.38

Pump Retainer

Sold Individually.

$3.02

Lid Hinge Mounting Screw

Sold individually.

$16.15

Tub-to-Pump Hose Kit

This kit comes with the clamps.

$4.89

D-Shaped Knob Insert

This insert is sold individually. Knob not included. Knob is sold separately.

$12.84

Break Hose

This hose goes from valve to inlet.

$6.36

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

$4.37

Retainer, Suspension Spring

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$5.73

Washer

This part goes on the agitator retaining bolt.

$8.00

Bleach Dispenser - White

This part holds the bleach until it is ready to be released into the cycle.

$4.89

Lid Bumper

This gray and white washer lid bumper contains a rubber bottom and is sold individually.

$28.22

Water Inlet Syphon

This part prevents water from flowing back into your main water supply line.

All Parts for the ATW4475TQ0
15-28 of 187