AS2728GIHB Maytag Refrigerator - Instructions

I watched the instructional video included with the shipping date e-mail(about 3 minutes long), and simply followed the instructions. It took about 2 days for the refrigirator section to return to normal cool temperature to the level set.

No instructions with part. Found a picture on line and changed the arm, but it didn't fix the problem. Fairly easy after figured out what needed to be done to get to the part.

unplug refrigerator, take backing off with nut driver. Pull old blade off and put new blade on. Put backing back on and plug in.

Problem caused by ice cubes falling out of ice bin and collecting at rear and interfering with ice dispenser drive. Broke plactic drive ring. Pull down 2 clips at front bottom of ice bin. Pull ice bin out. Dump ice cubes. Remove 8 star drive screws to allow case to move far enough to clear broken drive ring. Replace drive ring. Reinstall and tighten 8 screws. Install ice bin. Correct loose right side ice cube retainer board to prevent cubes from falling out of ice bin.

The main issue is that my supports are NOT held on by screws -- they are behind the fridge wall and can not be removed. So this is my solution (ignore the 'fix kit' -- it is useless and is just this part plus a metal screw. It cost me $20 to find this out). Here is what I did: 1) Cut off the old support with a knife. 2) Get a small toggle bolt (I used 1/8" x 2", < $2 from Home Depot) and thread into new support. 3) Dig around in insulation to make sure there is space for toggle to flip open. 4) Install!!!! Wish I'd thought of this before :-)

empty frezzer take door off unplug wires going to ice maker unscrew/bolt icemaker replace door take motor cover off ice maker remove screws on motor replace ice cup and put every thing back together

Changed bulb, not the problem, had to remove switch to identify correct choice to order (3 pronged verus 2) after that it was easy beyond having to stand on my head to make the exchange. (N B before removing old switch it actually came back to life)

took the old one out, put the new one in, reset the Refrigerator-Light 5 min. job. Tanks for the fast delivery B.Z.

replaced limit switch

I love your site and videos. If it were not for the video, I would have never been able to complete the work myself. The shipping of the item arrived in a day or two and the ability to buy just one piece was a huge help and cost savings. The schematic and part numbering made the whole job fairly easy. While fixing the flap, I accidentally had the spring drop on the floor. I though I was in real trouble until your site actually had a video on how to replace the spring. Yes, a spring. I was very excited to watch that video because there is no way I would have guessed the proper way to put it back on. The old guy in the video must have weeks logged in under the camera- he is my favorite actor right now.

removed torx screws and replaced ice bin drive ring.

removed the back cover unplugged the unit removed the old fan blades installed the new easy to pull off and easy to install

Removed 6 screws then repalced door strike and chute door. The video you provided on the spring for the strike was really helpful. Youre parts were perfect and speedy shipping!I was very please to be able to repair my refridgerator thanks to your parts!

removed old mount with allen wrench replaced with new mount

Looked at the blueprints then jumped in. Saved a bundle.