AFI2538AEB Refrigerator - Instructions

took out broken part put on new part was easy

It was very easy I just push ito n and it snaped right in.

I received the part very quickly in the mail, only 2 days later. I opened up the package and replaced the old try with the new tray and it was that simple! I couldn't believe that the replacement part only took one and a half days to get here. That was awesome! I have already used part select again and will continue to.

The annoying cover to the deli drawer broke off again. This is my second time purchasing this part from this website (left side and now, right side). Both purchases were very easy. Replacing the left side is easier because there isn't a temperature adjuster to remove and reinstall. I found this website very easy to find my parts both times, and I installed the right side (the latest fix) in less than 15 mintues while taking care of two kids. Many women do repairs around the house and are successful! :)

Super easy. 1) Remove beer from the bottom the glass shelf. 2) Remove the glass shelf. 3) Remove the broken Center Rail. 4) Replace the Center Rail. 4) Clean and replace the glass shelf then the beer (keep one bottle for consumption). ** NOTE: PartSelect was very simple to navigate and identify the correct part needed. Shipped/Received in a couple of days. The part was correct. Couldn't have been easier.

The repair is staightforward. Simply remove the deli drawer (up and out), the glass lid, and the vegatable drawers above it (easier access- they just slide out). Using a 1/4 socket I removed the 3 screws holding the end cap in place. You then disconnect the 2-3 places where the end cap connects to the humidity adjustment (front and rear). When the end cap is out you have to remove the drawer slide as and humidity adjustment slide as it isn't included in the replacement part- just 3 more screws- same size). Attach the drawer slide to the new end cap and do everything in reverse to replace it. Took all of 20 minutes including cleaning/drying the drawers etc while I had them out. Easy project.

Replaced the water filter with the bypass plug. The water in western NC is perfect out of the faucet.

Followed your internet instructions. Saved $1200!!

we only had mm sockets so had to go to the hardware store when we found they would not fit. We needed and american socket i/2 way between #6mm and #/7mm which turned out to be a 1/4 inch socket

I took all the food out and the shelves above the area. The end cap was a piece of cake to remove, only two screws to take out, and installing the new ones was very easy.The reason it took so much time is because I thoroughly cleaned the fridge at the same time.

Removed items from frifge, took out the lower drawer, removed side plate with broken part by nutdrive, replaced it, and put everything back - about 15 minutes. Easy.

Logged in to internet, for whatever reason I selected your site. Good choice! Entered the model number and selected the symtems identical to my refrig. Ordered the recommended parts, (Relay and Start Capacitor), to solve the problem. Reviewed the remove and install video. Received parts as promised by del date. Installed parts under 15 minutes, Frig kicked in and frig has been working beautiful. Avoided all those added expenses of; home service check, amount of days in- shop repair, plus parts and overhead charges. Will recommend site to my friends.

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

After one attempt to use super glue failed, obtained the part (shelf support). Had to remove drawers and a shelf to get to the support. Two hex screws held in place. No problems, a little touchy to put the lid back on, but all in all a simple repair. Didn't have instructions - didn't need them - it was straight forward.

Removed large lower drawer, removed contents from the lower shelf, removed the two produce drawers, removed glass shelf. At that point you will be able to remove the three screws from the left side pantry end cap. A slight upward and forward motion will release the side pantry end cap once the screws are removed. Once the side pantry end cap is removed, two screws will removed the drawer track. Note: you will have to slide the drawer track one way or the other to align a small hole to find and remove the hidden screws. The process was reversed to install the drawer track and side pantry end cap, etc. The actual removal and installation of the new side pantry end cap took less than 10 minutes. I was very pleased with the ease of ordering and speedy delivery of the part from PartSelect.com