Models > 9512WUV > Instructions

9512WUV Magic Chef Oven - Instructions

All installation instructions for 9512WUV parts

These instructions have been submitted by other PartSelect customers and can help guide you through the oven repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 9512WUV
61-68 of 68
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Digital clock/timer broken

  • Customer: Jennie from kingwood TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
There were NO directions in the box, only a schematic. I was unable to locate the old one as my husband had removed it. So I had to guess which color wire connected to which plug. Good thing I guessed right the 1st time! so you might want to include installation instructions going forward.

burnt out element

  • Customer: Glenn from Rochester NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Very easy. remove two screwa , pull element forward, unplug.Set new element in place, plug in. push back in. Screw in both screws and your done.

VERY EASY

  • Customer: Robert from North Canton OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Changed Bake Element in Oven.

Not heating to tempature.

  • Customer: Marta from Baton Rouge LA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I put the details of my repair on my blog, and can be found here. http://martaonamission.blogspot.com/2013/12/now-were-cooking-with-fireum-electricity.html?m=1

Heating element not working

  • Customer: sherri from Topeka KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Unscrewed two screws, unplugged two small plugs, plugged the new ones in and screwed the screws back in. Less than 10 minutes.

Bulb replacement

  • Customer: Judith from Phoenix AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I pulled down the wire around the glass cover...released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.

THE BAKE ELEMENT CEASED TO BAKE.

  • Customer: Robert from Pasadena TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
TURN OFF THE BREAKER. REMOVE THE TWO SCREWS HOLDING THE BAKE ELEMENT AND DISCONNECT THE TWO WIRES. PLUG THE NEW ELEMENT IN AND RE INSTALL THE SCREWS. TRIP THE BREAKER BACK ON AND TEST THE OVEN. IT WORKS.

Oven element would not heat.

  • Customer: Denver from Denton TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Turned power off by switching off the breaker. Removed both racks from oven. Removed two Phillips head screws at back of oven securing the old heat element. Pulled old heat element forward about four inches exposing the two power wires connected to it. Removed the wires from their connectors. Removed old element. Connected new element to power wires and pushed it back in place. Replaced new Phillips head screws. Replaced racks, and turned power back on. Oven was fixed in less than five minutes. Disposed of old element. Life is good.
All Instructions for the 9512WUV
61-68 of 68