Quick Question!

Have you ever purchased from PartSelect.com before?

11743942-1-S-Whirlpool-WP7212P003-60-Oven Door Seal
11743942-1-S-Whirlpool-WP7212P003-60-Oven Door Seal 11743942-2-S-Whirlpool-WP7212P003-60-Oven Door Seal 11743942-3-S-Whirlpool-WP7212P003-60-Oven Door Seal http://www.partselect.com/Schematics/Maytag/44855.gif

Oven Door Seal

PartSelect Number PS11743942

This oven door seal is fifteen and a half inches long. It is made of rubber and has a metal hook on either end to hold it in place. This seal sits on top of the glass window pane.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$41.41

You Save

$6.90

Your Price

$34.51
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 3 reviews What's this?
1-3 of 3
 

10 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: David from Albany, NY

Tenant complaind that oven door gaskets were worn out.

No "repair" needed, just parts replacement. The oven door had (3) rubber-like gasket strips, held in place by metal strips at each end of the gaskets, which fit into 3/16" diameter holes in the oven frame.
The (1) gasket ordered for the "horizontal"/upper position was an exact replacement and fit like a charm.
However, the pair of (2) gaskets ordered for the "vertical"/sides position were not designed for this range and needed MODIFICATION in order to be installed. Specifically, the metal strips at the end of the gaskets were TOO WIDE to fit into the existing holes in the oven frame.
I was able to make the metal strips Using a pair of needle-nose pliers and a pair of nipper-pliers, I was able to flaten-out each of the four metal strips, cut each metal strip [basically in half], re-bend the halfed-strips into "hook" shapes, and then re-insert the metal hooks into the existing 3/16" holes.
So far, so good; no complaints from the tenant!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
  • Oven Door Seal
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Patricia from Sanger, TX

Heat was escaping from my oven and really heating up my house

The heat sealing strips are elastic type material with hooks on each end. I simply removed the old strips and hooked the new ones in place.
It was easier than I ever dreamed possible!
And my kitchen is now nice and cool.
Pat Morrison
Sanger TX

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Oven Door Seal
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Robert from Lebanon, NH

Needed to replace a side oven door seal

The trickiest part was making sure that the correct part was ordered. The first attempt was a failure. The seal was too long and the clips were too big.
After finding the correct part it was a breeze.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3