1CWTW5790ST0 Whirlpool Washer - Instructions

It went very easy and the part was right very easy job to do saved a lot of money thanks to you thanks a lot

exactly like the instructions that came with the new parts said. they were very accurate.

The repair went very well as per the video, however the metal reinforced coupling only went onto the shaft half way. To ensure the coupling was flush with the top of the shaft I has to use a hammer and tamp the coupling onto the shafts. If you left it halfway on the shafts there was no room for the rubber spacer between the couplings. Other wise it operates very well.

Followed website instructions, worked for a couple days, appears it needs clutch or possibly transmission(red oil present)

Pulled off clamps, removed 2 clips, pryed off pump from shaft, sanded shaft(as it had rust on it) put a dab of oil on shaft, installed pump, hold down clips and hose clamps.

one thing that you do not need to do is to remove the pump from the motor, I tried to remove it as per the instructions but the pump cracked,remove both inlet and outlet hoses from the pump and remove the pump and motor together, don't try to take them apart, you don't need to, thanks

Did not know problem or how to access - thought the back came off washer. Typed in symptoms and it pretty much pinpointed the most likely cause. Watched video on how to take it apart (BTW the front and sides come off, NOT the back). Followed the guide, took motor off and sure enough one of the plastic couplers was cracked. Ordered from PartSelect and with regular shipping the cost was under $20 (ordered Tues. night, had it by Thurs.) Installed part - note as someone else said the new piece has metal inserts which make it really snug to go around the drive shaft, but the tip about using an oversized socket and some light taps to get it on worked liked a charm. Put it all back together (getting case back on was toughest part)and its been working fine for the last week - heavy & lite loads. Have to say was thinking the whole thing needed to be replaced (sound & age) but for $20 it was worth the shot...Glad i came here first!

Watched the repair video that came with receipt. Removed two screws from power head, folded out of the way. Removed two large clips holding outer shell on and removed outer shell. Tipped washer back towards wall. Removed two clips holding pump on to motor shaft. Removed both hose clamps, drained hoses onto towel. Aligned new pump onto shaft and did a reversed assembly of above items. Works great!

It was easy I followed your video step by step and it took approx. 20 minutes to complete the repair. Thank you

It was actually much easier than I expected. The worst part was dealing with the gear oil as I drained it to clean out the plastic pieces that came off the gear. To see how to fix things like this, I went to Google, enter my model and what the problem was and watched a repairman do it. It seemed easy and it was.

watch the video provided by partsselect.com, very easy to understand and found the correct parts because of that also. The parts arrived the next day, much faster than I expected honstly and installed them in about 10-15 minutes. Thank's to the help provided.

Never worked on a washer before, so dug around the Internet. A web search engine pulled up a description describing a coupler failure/repair, so was pretty sure it would be a simple/cheap fix. When looking for parts I came across PartSelect, and there the repair descriptions and videos made it simple.

removed agitator and replaced it with new part.

The clutch itself was fairly easy to repair. I did use some tips from youtube on disassambly, and the enclosed instructions helped to put the clutch in. There were 3 bolts I had to remove to take the drive assembly off, and 1 to pull the agitator out. And putting it back together it went in almost backwards. All in all, this is a fairly simple procedure in taking the time to complete the steps

Removed the upper sgitster by removing the center bolt to the bottom agitater. Manage to pull the cog housing apartfor inspection. left apart and ordered the new cogs. received the cogs within 30 hours and reassembled the unit and bolted it back to the main agitater. works perfect. great service. Thanks Ed PS Now my 97 year old mother in law can keep washing clothes. Shes happy again.