Models > 10651559103 > Instructions

10651559103 Kenmore Refrigerator - Instructions

All Instructions for the 10651559103
1306 - 1320 of 1519
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old refrigerator drawer gave up the ghost--don't know why--plastic became brittle
Parts Select Website was very easy to use, selected the correct part for me with no problem. Same drawer as Sears was selling but for much less money. Drawer came in new from the factory. Great Service, Fast Delivery. The shipper had damaged the drawer--something poked through the box and put a whole in the drawer--a small one cause by a sharp instrument of some kind. Called parts select, the problem was very simply rectified by refunding my money and then I bought a new drawer at the same time. No fuss, no muss. Fast delivery and great service.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The slide/ glide portion of the original drawer broke off
Pretty simple, remove the old one and put in the new one - kinda alike the "Automotive Tech's" of today.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Doug from Acworth, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Did not make ice
Watched video on changing out the ice maker motor and followed instructions and it was as easy as video demonstrated. Received replacement motor in 3 days. Great service.
Parts Used:
Icemaker Control Assembly
  • Robert from Jacksonville, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
Was this instruction helpful to you?
Thank you for voting!
old crisper drawer gave up the ghost--brittle
Nothing to it, just slide the drawer in. Fast Delivery, Smooth Transaction, Great Service. I will use them for all the parts I need in the future. Thanks
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice Maker would not make ice
removed ice make from freezer. Removed end cap and replaced control and mostor assembly. The associated You Tube video was very helpful.
Parts Used:
Icemaker Control Assembly
  • Anthony from Clarence Center, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water leak under refigerator
My wife could have made the repair, I got on line, typed the problem in and PartSelect came up. The drawings were there as well as instructions. The part came, again with instructions and it took about 20 min. Good job guys.
Parts Used:
Water Inlet Valve
  • Ronald from Taylor, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker not working
Shut off water & electric.Remove 2 screws,cut water lines,unplug electric plug. Install electric plug,push water lines in.reinstall screws,hook up water line & plug in ref.Turn water on, ck for leaks.
Parts Used:
Water Inlet Valve
  • William from East Canton, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
none
Took the old one out and put the new one in. No problem.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Nancy from Petersburg, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The door would not close tight unless you gave it an extra push
Removed the old cam and put books under the door to hold it up. Follows instructions and really easy
Parts Used:
Lower Door Closing Cam
  • Cindy from Kenner, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
fridge too warm
remoove all the food and shelves out from the freezer section, remoove the light bulb lens ( 1 phillips screw) remoove light bulb, take out 6 srews on the back panel then slide out through the top with a slight bending curve motion, the bimetal thermostat will be clamped to the evaporator inlet, ( just after the cap tube) snap it off, then cut the wires about 2 inches from the stat, strip the ends about a quarter inch with wire strippers, same on the new stat, then use 16 or 18 gauge butt splices and crimp them , then reassemble in reverse order.
Parts Used:
Bi-Metal Defrost Thermostat
  • mike from ROSCOE, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Electronic Control Boards - Emitter and Receiver has no power
when I install the Electronic Control Boards has not Receiver the Electronic from water valve .
Parts Used:
Ice Bin Coupling CNTRL-ELEC
  • Tom from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Outside door water shut off return part broken.
Used 1/4 inch nut driver with swivel to remove the part retaining screw. Held new part into place and installed the retaining screw. Challenge was not hitting the level and putting water on me and the floor during installation. Relatively easy installation as long as you have patients.
Parts Used:
Levers Retainer/Clip
  • Jerome from Abingdon, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
broken crisper drawer
The part fit perfectly. All I had to do was slide it in. Very speedy delivery and I am very satisfied with the service and would recommend your wedsite to anyone. Marie
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • marie from metairie, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser would not dispense ice
watched the video on your website, assembled the tools needed, then replaced the bracket. It was so easy because I would play one step in the video, do that step, then repeat for the rest of the video. Very happy with the part and speed of service with partselect.com and the video was excellent !!
Parts Used:
Control Bracket
  • Leesa from Griffin, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door would not close properly
The instructions on line suggested I buy a lower door closing cam and a thimble top which I did. When I went to install I noticed that the door hinge with cam was also warn down. I had to again place an order and again remove the door to install. I would suggest those having this problem that they look at the hinge with cam also before ordering.
Parts Used:
Thimble Top Lower Door Closing Cam
  • George from Loudon, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10651559103
1306 - 1320 of 1519