Models > 10651559103 > Instructions

10651559103 Kenmore Refrigerator - Instructions

All Instructions for the 10651559103
1291 - 1305 of 1519
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
freezer was not consistent in keeping cold enough to keep itiems from defrosting. Fridge was not keeping up to temp. Noticed compressor would try to cycle but would cut out. Gave a Fonzerelli tap "ehhh" to the temp control and controls would kick on and work for short periods.
Watched the video link from the part order and the step by step instructions were as easy as the repair man showed. This is an easy do it yourself job that will fix the problem I describe with the unit. Ahhh a working freezer making and keeping ice once again.
Parts Used:
Thermostat Assembly
  • Kurt from Staatsburg, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
compressor no run. smell of burning wires
I followed the inclosed (simple) instructions.
Parts Used:
Compressor Start Device Kit
  • NATHAN from MARIANNA, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Light switch inoperative
Remove inside door trim plate. Then removed three screws that held in the light assembly. The only difficult thing was reconnecting the temperature adjustment rod. After replacing this rod you must slide the temperature control slide to midway and this hold the rod in place while reinstalling the light assembly. If I were to do it again it would probably take me half as long.
Parts Used:
Door Light Switch
  • Timothy L from Middlebourne, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken slide
simply slid the new part in place...really simple
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Evelyn from Indianapiolis, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Work sometime , sometime you have to tap around the thermostat area
Working from inside out . Remove left upper tube cover and then vent cover . Remove thermostat tube from around the vent . Remove knobs and front cover . Remove 4 hex screws , drop the whole unit enough to expose the left control rod , remove the rod retaining clip . Gently separate control rod from unit . Take the whole unit to working bench or table . Remove thermostat and bracket . Need to reuse bracket with new thermostat . Don't forget the clear plastic tube you have to reuse that as well . Be careful not to kink the thermostat tube . Reverse procedure , working from outside in . Good luck
Parts Used:
Thermostat Assembly
  • douglas from Alhambra, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Plastic peice broke in the icemaker control
Unpluged the refrigerator. Removed the cover on the control unit by inserting a screw driver under the metal clips. Removed the three screws frrom the front of the control unit. Pulled toward the back of the refrigerator on the metal loop which turns the icemaker on and off and it came loose where it goes into the control unit. Wiggled the unit and it came free. place the new unit in approximately the right position. Reached into the icemaker and moved the ice eject leavers so the shaft would enter the control unit with the flat side of the ejector in the right position. Gently pushed the control unit into its place and aligned the screw holes. Replaced the three screws. Inserted the wire shut off loop into the hole on the back of the control unit housing. Pluged in the electric. The ice maker worked.
Parts Used:
Icemaker Control Assembly
  • Brandon from New Brighton, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Not making ice.
Followed instructions on video on website. Very easy to do. Removed old part, put in new and it took all of 15-20 minutes. Had ice in approximately 1 hour.
Parts Used:
Icemaker Control Assembly
  • George from Palm Coast, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken door shelf
You saved us a bunch of money again! We love you!
Parts Used:
Refrigerator Door Shelf
  • GRACE from BREMERTON, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The refrigerator would not cool
Only the compressor fan was running with no cold air, the compressor wouldn't kick on. I pulled the start relay and the disc inside was in pieces ( rattled when you shook it). I ordered the new one and installed it. The compressor started running right away and cold air was delivered to the freezer.
Parts Used:
Compressor Start Device Kit
  • justin from carlisle, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Coupling broken between ice bin and grinder unit
removed the ice bin, removed small screw in bottom of grinder (visible from bottom). placed new coupling on shaft, inserted new screw and was finished. Super fast.
Parts Used:
Ice Bin Coupling Screw
  • Dwight from Morehead, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door would not close by itself
Followed instructions on this website. Only difference I placed a couple blocks under the door to keep it from dropping & removed both cams at the same time. No need to remove the door from the unit.
Parts Used:
Door Cam - Black Lower Door Closing Cam
  • rich from liberty twp, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
the refrigerator tunrs off and defrost
After watching the convenient movie, the replacment of the Thermostat was very simple and easy. i woul strongly advise you to take a picture of the wires before disconecting so, you will be sure to to reconetc it again.The replacment was a success and the refrigerator has been working since them
Parts Used:
Thermostat Assembly
  • dorival from pembroke pines, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broke the water filter cap
That was soooooooooo easy. Thanks for a really wonderful website. Part was simple to find and shipped extremely fast.
Parts Used:
Water Filter Cap
  • Judith from Louisburg, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Side Of Drawer Was Broken And Couldn't Run On The Guides.
Took the broken drawer out and installed the new drawer.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Valerie from Sevierville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bottom door shelf broke
Ordered part from Parts Select at half the cost of other listing on www. Took 5 minutes and shelf fit perfectly.Thanks.Mike
Parts Used:
Refrigerator Door Shelf
  • Mike from Palm Harbor, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10651559103
1291 - 1305 of 1519
Back to Top