Jenn-Air Dishwasher Latches

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Jenn-Air Appliance Parts
Shop By Part Type

Popular Jenn-Air Dishwasher Latches

Videos!
Your Price
$49.68
  In Stock
Jenn-Air Dishwasher Door Handle And Latch Assembly with Switch
★★★★★
★★★★★
678 Reviews
PartSelect Number PS11748729
Manufacturer Part Number WPW10130695
This door latch (Dishwasher Door Latch Assembly, Door Latch Assembly, Latch Assembly) is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. It is located on the door of your dishwasher, and is mounted on the inner door panel. The door latch can break from material fatigue. If the door is often slammed or opened quickly, the latch may break prematurely. If the door won't open or the door switches won't activate, you will need to replace this part. This latch measures 5 1/2 inches wide, 4 1/2 inches high, 2 1/2 inches deep, is constructed out of plastic and comes in black. The kit includes the black handle, latch, and 2 switches.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Walter from Tucson, AZ
Broken latch handle
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is disconect the power from the dishwasher (unless you like to live dangerously like me) take your drill with the correct size torx bit and remove all the screws on the inside door pannel (the top center two screws actually hold the latch assembly in place). Disconect the 4 wires from the old part and reconect them to the new part and reinstall all the torx screws being careful not to strip the plastic threads that they screw into if you are using a drill. Whole process takes less than 5 minutes. I am surprised that Maytag used such a flimsy handle assembly in their dishwashers since they are supposed to have the repair men with the most time on their hands. They probably sell just as many handle assemblies as they do dishwashers that have this particular part in it, probably more since you will probably have to change it 2 or 3 times during the life of the unit. Read more...
Videos!
Your Price
$36.58
  In Stock
Jenn-Air Dishwasher Door Latch - Black
★★★★★
★★★★★
10 Reviews
PartSelect Number PS11756967
Manufacturer Part Number WPW10653840
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
RONALD from PRESCOTT, AZ
Door would not latch shut
Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box. Read more...
Videos!
Your Price
$44.11
  In Stock
Jenn-Air Dishwasher Door Latch - Black
★★★★★
★★★★★
21 Reviews
PartSelect Number PS8770043
Manufacturer Part Number W10619006
NOTE: This part has been redesigned, it may appear different but will still function the same as the original.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Arthur from NEWNAN, GA
Inoperative door latch replaced by a redesigned latch
1. Disconnect power at the breaker, 2. remove two wood screws fastening the dishwasher to the cabinet and slide the unit out approximately 2 inches. 3. Remove old latch strike and replace with redesigned strike. 4. Slide unit in and reattached to cabinet. 5. Remove 11 screws holding inner panel of door assembly and one screw holding user interface unit to door. 6. Disconnect snap cable to latch assembly and replace the latch unit. 7. Reassemble. Read more...
Videos!
Your Price
$56.27
  In Stock
Jenn-Air Dishwasher Door Latch with Switches - NO Handle
★★★★★
★★★★★
20 Reviews
PartSelect Number PS11751688
Manufacturer Part Number WPW10275768
This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be the solution. For this repair, remove all screws from the inner panel, then lift up the inner door panel and hold the door apart. Next, access the latch and pull wires from the switches. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the dishwasher from the power source or shut off the house circuit breaker before beginning this installation project.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Dennis from Austin, TX
Latch handle broke due to Latch Assembly worn
This repair was fairly quick and easy. The parts are much better made than the stock Maytag. The parts from PartSelect came lightening quick! Never used before, always Sears, but will ALWAYS use from now on!
So, first, make super sure all power is disconnected. Then take the torx and remove all the screws on interior front cover - the top center two actually hold the latch assembly and handle. Once all are removed, I propped the cover up and left all wiring connected. I removed the switches connected to the old latch assembly and just removed the new switches from the new latch assembly, and popped the old ones onto the new latch assembly. Now have new switches if the old ones ever wear out.
The latch assembly just pops out from what should be two sets of plastic peg clips molded into the black control panel back. Mine were busted on one side. So I molded some jb weld on the remaining sides to the pegs on the latch assembly and then screwed all back together (the controls on the panel are fine, not spending $85 if I can get away with sticking it...and the upper center two screws do the most of the holding anyway).
Works great again. I really am ultra impressed with the HUGE difference in reinforcement that the new handle has. If Maytag would have built it that way to begin with, should not have broke. Anyway, if you are here just checking to see if you can do and how much parts are, place the order - it is no problem and cheap, and will probably never give up and break again. Read more...
Videos!
Your Price
$67.08
  In Stock
Jenn-Air Dishwasher Door Latch and Switch Assembly
★★★★★
★★★★★
13 Reviews
PartSelect Number PS11754317
Manufacturer Part Number WPW10404412
Handle NOT included. This door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Gerald from CASTLE ROCK, CO
Lock latch would not function properly
Removed front instrument cover. Removed latch assembly. Tried to fix it . No luck. Ordered new latch assembly. Came in from partsselect in 3 days. Installed new latch. Replaced cover. Read more...
Videos!
Your Price
$86.06
  In Stock
Jenn-Air Dishwasher Door Switches and Holder Assembly
★★★★★
★★★★★
17 Reviews
PartSelect Number PS2099645
Manufacturer Part Number 99002254
This part senses when the dishwasher door is closed so the cycle can start, and prevents it from starting if the door is not closed. If the dishwasher will not start or will not close, you may need to replace the door switches and holder assembly, also known as the door latch assembly. The dishwasher will not start if this part is defective. It includes two switches and the holder, this part does not include the handle or screws. Tools needed are T20 torx driver, needle nose pliers, and 1/4 inch nut driver. This is a genuine OEM part that is sourced directly from the manufacturer.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Robert from Johnson, VT
no power
remove the eight screws that hold the inside door cover to gain access to the door switch.
remove the four wire conections and replace with new new switch Read more...
Videos!
Your Price
$73.22
  In Stock
Jenn-Air Dishwasher Door Actuator
★★★★★
★★★★★
1 Review
PartSelect Number PS11746083
Manufacturer Part Number WP8524471
This part is the door actuator for your dishwasher. It is made of black plastic and is approximately 3 inches long and 3 inches wide at its widest point. The door actuator is found in the control panel, and it releases the door latch when you lift the handle. If your current door actuator is cracked or broken, you may not be able to open your dishwasher door, or the door will not close properly. The dishwasher also may not be able to start, and if this is the case, you will need to replace it. This part is sold individually and is an authentic OEM part.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Nigel from Boca Raton, FL
The door handle broke inside so that it was all loose and was difficult to close.
Recoved the screws which secured the handle assembly (approx 8). Removed the old parts and screwed home the new parts and replaced the assembly. Worked perfectly.

The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.

Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...
Videos!
Your Price
$62.32
  In Stock
Jenn-Air Dishwasher Door Latch Bracket Kit - NO Handle
★★★★★
★★★★★
7 Reviews
PartSelect Number PS886319
Manufacturer Part Number 8193882
Handle is not included with this part.
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Will Not Start
  • See more...
Installation Instructions
Nigel from Boca Raton, FL
The door handle broke inside so that it was all loose and was difficult to close.
Recoved the screws which secured the handle assembly (approx 8). Removed the old parts and screwed home the new parts and replaced the assembly. Worked perfectly.

The hardest thing for me was to decipher the model number as they use '1s' and 'Is' and you can't tell them apart.

Also the part diagrams should have each part number listed to make it easier. Took me longer to work out what to order than do the repair. Read more...
Videos!
Your Price
$7.41
  In Stock
Jenn-Air Dishwasher Lever
PartSelect Number PS11750029
Manufacturer Part Number WPW10195037
Fixes these symptoms
Your Price
$9.26
  Special Order
Jenn-Air Dishwasher Fold Away Tine Latch
PartSelect Number PS2100480
Manufacturer Part Number 99003190
Fixes these symptoms
Installation Instructions
Victor from Cary, NC
The plastic bits in the dishwasher's drawers eventually break incl the bottom "mesh" of the flatware basket
These parts snap in and out by hand, except the flatware basket of course. After getting the new parts I will mention two things: 1) the two halves of the flatware basket are symmetrical; i.e., you can use two of either basket PN as long as you don't care about how the basket is divided (one side has two sections and the other has three); 2) the replacement parts seem to be made of stronger/more flexible plastic (either the material degrades over time from the heat and detergent, or maytag had enough early product life warranty claims on the pastic bits that they improved the material). Read more...

Related Jenn-Air Dishwasher Parts

Back to Top