Jenn-Air Dishwasher Filters

Videos!

Your Price

$58.02

Jenn-Air Dishwasher Filter

★★★★★

32 Reviews

PartSelect Number PS11759673

Manufacturer Part Number W10872845

This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will need to be replaced. A good indication of a damaged filter is if your dishwasher is not draining or cleaning the dishes properly. This filter has a gray plastic top and bottom that are approximately 5 inches in diameter. This is a genuine OEM part that comes directly from the manufacturer. To replace the filter, simply turn it counterclockwise to unlock, and then screw in the new filter

Fixes these symptoms

Leaking
Not cleaning dishes properly
Not draining
See more...

Installation Instructions

Kathy from TECUMSEH, MO

My filters had completely clogged up with hard deposits and food left on the dishes after running the dishwasher.

My filters had completely clogged up and had not cleaned my filters at all which was a no-no.I had lots of food left on the dishes after running my dishwasher, so I took bothp filters out and replaced them no tools required. I won’t be using powdered or liquid detergent for my dishwasher anymore only pods and promise to clean my filters once a month, so hopefully that’ll help keep them clean. Very easy replacement even for an old woman. Read more...

Videos!

Your Price

$35.73

Jenn-Air Dishwasher Screen

★★★★★

6 Reviews

PartSelect Number PS11755148

Manufacturer Part Number WPW10463906

Fixes these symptoms

Not cleaning dishes properly
Not draining
See more...

Installation Instructions

Kathy from TECUMSEH, MO

My filters had completely clogged up with hard deposits and food left on the dishes after running the dishwasher.

My filters had completely clogged up and had not cleaned my filters at all which was a no-no.I had lots of food left on the dishes after running my dishwasher, so I took bothp filters out and replaced them no tools required. I won’t be using powdered or liquid detergent for my dishwasher anymore only pods and promise to clean my filters once a month, so hopefully that’ll help keep them clean. Very easy replacement even for an old woman. Read more...

Videos!

Your Price

$136.41

Jenn-Air Dishwasher Accumulator Filter

★★★★★

7 Reviews

PartSelect Number PS11749941

Manufacturer Part Number WPW10192799

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

Fixes these symptoms

Noisy
Not cleaning dishes properly
Not draining
See more...

Installation Instructions

Gilles from Cypress, CA

Machine not cleaning, leaving crud on dishes. The old Accumulator filter was punctured and full of crud. One broken wheel from abuse.

Take out the old parts and clean all the ones to be reused by power washing with garden hose and/or compressor blasting. Put it all back together. BE VERY CAREFUL NOT TO PUNCTURE THE ACCUMULATOR FILTER! THE TORX SCREWS ARE RIGHT NEXT TO THE FILTER SO IF YOU SLIP AND DROP THE TOOL, THE FILTER WILL BE TOAST!

THE DISHWASHER WORKS PERFECT NOW! Read more...

Videos!

Your Price

$45.43

Jenn-Air Dishwasher Pump Housing Filter

★★★★★

2 Reviews

PartSelect Number PS11747618

Manufacturer Part Number WP99001791

This pump housing filter is twenty-three inches long and a little over two inches wide. This filter wraps around a dishwasher's pump housing and clips in place. It is all white in color and is made of plastic with a mesh screen.

Fixes these symptoms

Leaking
Not cleaning dishes properly
See more...

Installation Instructions

Josephine from Clearwater Beach, FL

dishes weren't getting cleaned

1) Lower Spray Arm and Pump Housing Filter:
1a) Unscrewed lower spray arm cap. Removed lower spray arm. Removed metal radiant shields from lower spray arm, cleaned them, and snapped them onto the new lower spray arm.
1b) Removed Torx screws from pump cover, then removed pump cover.
1c) Curled new filter into circular shape, interlocking the tabs to connect the ends together, then replaced the old pump housing filter by removing the old filter and then pushing the new one into place in the pump cover. Old O-ring was fine, so didn't really need to replace it.
1d) Re-installed pump cover by aligning the water ports on the cover with those in the dishwasher, then pushing cover down into place, then installing and tightening the Torx screws. If I were to do this repair again, I would replace the pump cover with a new one.
1e) Installed the spray arm by placing the new lower spray arm into position over pump cover, then screwing in the lower spray arm cap.
2) Upper Spray Arm
2a) Removed upper spray arm by unscrewing the snap outlet nut, then removing the spray arm retainer. This way, the retainer is undamaged and can be re-used.
2b) Attached new upper spray arm to snap outlet nut by pushing old retainer through new upper spray arm and into snap outlet nut.
2c) Installed new upper spray arm by screwing snap outlet nut back into the dishwasher. Read more...