broke syphon elbow while moving machine

ApplianceMaytag Washer

Modela510

Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Michael From White Plains, NY

Feb 16, 2010

0 out of 1 people found this instruction helpful

Performed repair through access cover in rear of machine. Removed screws with a nut driver and took out broken elbow. Pulled hose down to access hole to replace gasket then put back into position. installed elbow and reinstalled screws.
( this was tricky, have a helper to start the screws or place the screw in the nut driver with a piece of cloth to hold it in place), Make sure the screws are tightend evenly so the elbow sits completely against the gasket

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Syphon Break Elbow Kit with Clamp

Part Number: PS2017573

$16.14
In Stock

Syphon Break Gasket

Part Number: PS2018876

$24.70
In Stock