Quick Question!

Have you ever purchased from PartSelect.com before?

11746894-1-S-Whirlpool-WP96160-Screen
11746894-1-S-Whirlpool-WP96160-Screen 11746894-2-S-Whirlpool-WP96160-Screen http://www.partselect.com/Schematics/Maytag/37271.gif

Screen

PartSelect Number PS11746894

Found on the water inlet valve.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$6.61

You Save

$1.10

Your Price

$5.51
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 1 reviews What's this?
1-1 of 1
 

11 of 20 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Peter from Aurora, IL

The fill cycles would start then stop suddenly

This was an easy repair.
1st I removed both water hoses
2nd I removed 1 hex head screw that released a backing plate & removed the plate holding the water inlet valve.
3rd I pulled the 4 electrical connections & loosened a clamp to remove a small water hose.
4th I removed 2 hex head screws that held the water valve to the backing plate.
-----------that was a whole 5 - 10 minutes!------------
Next I reversed the process
4th I attached the inlet valve with the 2 hex head screws
5th re-attached the 4 electrical connections(had slip on spades) pushed on the hose & tighterned the clamp.
6th replaced the backing plate with the inlet valve attached & tightened the single hex head screw.
7th re-attached the hot & cold lines................................DONE
15 minutes tops

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1