Quick Question!

Have you ever purchased from PartSelect.com before?

952864-1-S-GE-WB13T10046        -Spark Module - (4+0)
952864-1-S-GE-WB13T10046        -Spark Module - (4+0) 952864-2-S-GE-WB13T10046        -Spark Module - (4+0) 952864-3-S-GE-WB13T10046        -Spark Module - (4+0) http://www.partselect.com/Schematics/GE/00121798i02.gif

Spark Module - (4+0)

PartSelect Number PS952864

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part works with the following brands: General Electric, Kenmore.

This part works with the following products: Range, Cooktop.

This part fixes the following symptoms:

  • Will Not Start.
  • Gas igniter glows, but will not light.

Compare At

$45.73

You Save

$7.62

Your Price

$38.11
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 6 reviews What's this?
1-6 of 6
 

20 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers
Customer: Frank from Steilacoom, WA

Spark would not turn off.

Removed the burers using a torx wrench disconnected the spark wire then replaced the spark generator and the wire harness to the gas valves.
Installation went smooth and easy.
replaced the spark wire and re-assembled the burnners. very easy repair. replaced the sark generator though it didn't need it because I didn't want to un-assessemble the unit again at a later date.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 18 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools:
Customer: frank from cathedral city, CA

Igniter wasn't lighting burner

Repair to range went real well, Lifted range from

counter. Removed eight screws that secure burner

assembly. Lifted burners from it's position, and

removed igniters. Installed heat srink at burner

connections so as to ensure high voltage would

have no leaks. Removed insulation, and installed

spark module.. Reassembled unit, placed in

counter cut out, put 110 volt cord into outlet.

Tested all burners, everything worked great..

The repair took about hour and 15 minutes.

Have fun and be careful...... THE END

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 8 people found this instruction helpful

Parts Used:
  • Spark Module - (4+0)
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: VINCENT from CYPRESS, TX

Spark module was not working correctly

I unscrewed the burners which was three screws per burner then removed gas control knobs and pulled up range top and un hooked the old module and replaced it with the new one two screws hold it in place and connected it the same way the old one was and put range back together and now it works perfect and saved me over $250.00 and part only coated around $40 with shipping great parts seller and I highly recommend partselect.com very easy fix thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: James from ABINGDON, VA

Gas coke top wouldn't lite

First step is to turn off the electrical then disassemble the cook top. It is secured to pan by each of the burner mechanisms. Disconnect the spark wire from each porcelain drip pan. Separate the glass top from the pan. If it's stuck gently slide a putty knife int between the two to separate and carefully set the glass top aside. The spark module was a bit challenging in that the colors of the wires didn't match so if you aren't comfortable with electrical work I would get help. The module didn't fit the bracket so,I had to drill new holes and use self tapping screws to mount it. The other part part I intended to change was the spark igniter switch. Unfortunately the wiring was incompatible so I had to return that part. This top was sold by Kenmore but made by GE and is over 10 years old so I suspect an engineering change obsoleted my part. Overall the job wasn't that bad if you are reasonably mechanical..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
  • Spark Module - (4+0)
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: paul from las vegas, NV

Sparking at 2 different burners all by themselves

Replaced Spark Module and adjusted igniters

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Paul from UPLAND, CA

Igniters would not turn off

Replaced starter switch harness as well as igniter module. Cost was around $70 for parts. Cheaper than a new cooktop.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6