733083-1-S-Whirlpool-9755424           -Safety Valve and Regulator Assembly
733083-1-S-Whirlpool-9755424           -Safety Valve and Regulator Assembly 733083-2-S-Whirlpool-9755424           -Safety Valve and Regulator Assembly 733083-3-S-Whirlpool-9755424           -Safety Valve and Regulator Assembly

Safety Valve and Regulator Assembly

PartSelect Number PS733083

The safety valve makes sure that no gas is released until the igniter gets enough power to ignite the gas range and the regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Little to no heat when baking.
  • Compare At

  • You Save

  • Your Price

In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.3 / 5.0, 1 reviews What's this?
1-1 of 1

41 of 59 people found this instruction helpful

Parts Used

  • Safety Valve and Regulator Assembly

Level of DifficultyVery Difficult

Time to do repair:1- 2 hours


Customerjames from downers grove IL

Oven wouldn't light

My analysis was flawed. The $100 gas valve was acting erraticaly, so I replaced it. On a hunch, I took the top front off the stove and immediately saw a row of mini relays mounted on the $300 control board. The one labeled "bake" was black!
It is just too small for years of gas on / gas off high current. (The gas valve is indestructable. I took the old one apart. It's only a heater wire wrapped around a bimetalllic arm that lifts a soft pad off of the valve orfice.)
I removed the control board and desoldered the "bake" relay and the "light" relay. I cleaned up the bad "bake" relay contacts and swapped the two relays. Works fine. Better $100 mistake than a $300 control board. (Could have been $0, though.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1