Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GW395LEGB0

GW395LEGB0 Whirlpool Range - Overview

Get Parts and Repair Help for GW395LEGB0

If you know the range repair part you need, you can browse the list of all parts on the GW395LEGB0, or you can search by name or part description. You can also find your part by where it is located on the GW395LEGB0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GW395LEGB0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 3 hrs and your part ships today!
$21.46

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 3 hrs and your part ships today!
$7.22

Touch-Up Paint - White

18ml

Order within the next 3 hrs and your part ships today!
$19.29

Single Drawer Roller

Used to slide the broiler drawer open and closed.

Order within the next 3 hrs and your part ships today!
$5.70

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper...

Order within the next 3 hrs and your part ships today!
$11.07

Spray Paint - 12 oz. - White

Order within the next 3 hrs and your part ships today!
$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

Order within the next 3 hrs and your part ships today!
$33.84

Surface Igniter

Also known as spark electrode. This part helps your burner ignite and produce flame.

Order within the next 3 hrs and your part ships today!
$22.95

PRIMER

Order within the next 3 hrs and your part ships today!
$4.94

Screw

This screw is sold individually.

Order within the next 3 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F3 Error message

  • Customer: Charles from Brecksville, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 123 of 159 people found this instruction helpful
Two screws remove the front of the sensor (put a pan under the sensor to catch the screws), One nut removes the rear cover to access the rear of the sensor. Separating the two halves of wiring harness takes a little dexterity. BIG TIP! Tie a string to the back of the sensor wire and pull the sensor out from the front making sure the string still shows thru t... read more

Inside door glass broke

  • Customer: MANNY from LIVERMORE, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 91 of 100 people found this instruction helpful
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installi... read more

Oven stopped working/Slow to ignite

  • Customer: John from Chicago, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 42 of 46 people found this instruction helpful
Although the ignitors glowed brilliant yellow I learned from an expert there are 2 fail modes. 1. that they break and don't glow well enough to ignite the gas or 2. they get resistive over the years and do not pass enough current to open the valve. This is important to know because the current passes through the ignitor before it gets to the valve. If the... read more