391617-1-M-Whirlpool-8181846-Door-Handle.jpg
391617-1-S-Whirlpool-8181846-Door-Handle.jpg 391617-2-S-Whirlpool-8181846-Door-Handle.jpg

Door Handle

PartSelect Number PS391617

This handle may appear white, but is light gray in color called Platinum.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door will not open.
  • Lid or door won’t close.
  • Shakes and moves.
  • Door latch failed.
  • Compare At

    $29.40
  • You Save

    $4.90
  • Your Price

    $24.50
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number 885424

Pewter in color. Handle only.

$25.64
In Stock

Door Handle

Part Number 885425

Biscuit in color. Handle only.

$29.90
No Longer Available

Door Handle

Part Number 391648

$20.94
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 65 reviews What's this?
1-15 of 65
 

58 of 62 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPaul from Burns TN

Handle broke off

Removed the 2 scews and pulled the broken handle off. placed new part on and attached with the 2 screws. Very easy not to mention I received the part in just 2 days! Wow, now that is fast!

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 15 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCarl from Hahira GA

Plastic handle broke; and needed replacement

Removed the old screws with a phillips screwdriver, screwed the new part on. 1 minute tops!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 16 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichelle from Merrillville IN

Handle broken at screw connection

First I removed the screws and removed the broken pieces. I then attached the new handle with the removed screws. Easy as 1..2..3...

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTom from Frisco TX

Door handle cracked

Removed screws, took cracked handle off, put new handle on, and replaced screws. So simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlex from Edina MN

Replaced broken door handle

So easy - i just replaced the door handle with screw driver

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLuis from Sharon MA

Plastic door handle broke

It took more time to find the right screwdriver bit than to do the replacement. Removed the 2 screws holding the handle. Put new handle in place. Put the 2 screws back in. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLynn from Harrington Park NJ

Plastic door handle broke off

My 12 year old son did it in about 3 minutes. I wish I had oredered more because it is sure to break again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerlarry from Pleasant Garden NC

Broke door latch and handle

very easy fix. works great and good price on parts

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerDennis from Huntingdon TN

Would not pump water out at end of cycle.

First you need to remove the water from the machine, a shop vac hooked to the drain line works very well. Next remove the lower front panel ( two screws at bottom corners) and unplug pump. Remove the hose clamps and remove the hoses. Remove the screw at the front of the pump assembly and pull toward you and lift up. Instal new pump in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichele from Aston PA

Handle broke off door

the old handle was held in place with two screws.
the screws were removed, handle came off right away and then the new handle was place on the door and the screws were replaced.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMaxine from Wilmington NC

Door handle broke off.

This was truely easy. All I needed was a flat head screw driver and it was done within five minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDustin from Mount Dora FL

The door handle had cracked and broken off

First I removed the two screws that held the old handle and then replaced the new handle with the same screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerEd from Mosinee WI

Broken handle

Super easy replacement. 2 Screws and a regular screwdriver or a #20 torx will work.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerLeslie from Richmond VA

Plastic door handle broke off when caught on the pocket of my jacket

First, I unscrewed the two screws on the broken handle, using an allen wrench. Then, I screwed on the new handle in it's place. The new grey handle is much lighter in color than the original charcoal grey of the washer, but it blends well and works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerdave from woodway WA

Broken plastic washer door handle

Just required removal of two screws, placing the new handle and reinstalling the two screws. Easiest repair I've ever done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 65