Models > GHW9100LQ2

GHW9100LQ2 Whirlpool Washer - Overview

Get Parts and Repair Help for GHW9100LQ2

If you know the washer repair part you need, you can browse the list of all parts on the GHW9100LQ2, or you can search by name or part description. You can also find your part by where it is located on the GHW9100LQ2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for GHW9100LQ2 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$22.59

Door Handle

This handle may appear white, but is light gray in color called Platinum.

$82.92

Bellow

This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. Clamps are not included. Must order clamps separately, if needed.

$17.21

Control Knob

This knob is light gray and is used on platinum-colored models. Sold individually and accepts a D-shaped shaft.

$73.55

Door Lock Latch

This part is used on front load washers and includes the interlock switch assembly.

$137.11

Drain Pump Kit

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.

$36.88

Shock Absorber

Shock absorbers help keep the washer from vigorous shaking during its cycles. Note: They are sold individually. Order quantity needed.

$53.75

Water Inlet Valve

Used with some front load washers. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

$2.70

Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$14.70

Bellow to Outer Tub Clamp

Used to help hold your bellow in place on your washer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

broken plastic washer door handle

  • Customer: dave from woodway WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 465 of 467 people found this instruction helpful
Just required removal of two screws, placing the new handle and reinstalling the two screws. Easiest repair I've ever done! read more

Bellows were moldy, needed to replace

  • Customer: Franck from Annandale VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 209 of 224 people found this instruction helpful
The first step is to remove the retainer ring that holds the outside of the bellow in place.
To do this, Open the washer door as far as you can to get it out of the way. look underneath of the front of the bellow on the outside of the washer where it meets the door. Put your head almost on the floor and look up.
You will find a spring streached... read more

Handle broke off

  • Customer: Paul from Burns TN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 140 of 221 people found this instruction helpful
Removed the 2 scews and pulled the broken handle off. placed new part on and attached with the 2 screws. Very easy not to mention I received the part in just 2 days! Wow, now that is fast! read more