269445-1-S-GE-WH11X10015        -Timer Dial
269445-1-S-GE-WH11X10015        -Timer Dial 269445-2-S-GE-WH11X10015        -Timer Dial 269445-3-S-GE-WH11X10015        -Timer Dial

Timer Dial

PartSelect Number PS269445

This dial is located behind the timer knob.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not start.
  • Compare At

    $20.76
  • You Save

    $3.46
  • Your Price

    $17.30
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Timer Knob with Clip

Part Number 271124

White in color.

$5.05
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews What's this?
1-4 of 4
 

22 of 31 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGordon from BLUE DIAMOND NV

Timer knob broke off where the dial compression ring fits.

All I had to do was pull out the broken timer dial assembly and push in the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerCHRISTOPHER from BALTIMORE MD

Timer was loose

had to replace the timer assy. the removal of the clip on the back of the timer knob was a little tricky. i removed the 4 torx screws from the top of the washer. disconnected the gang plug from the timer assy. reinstalled timer, gang plug, reinstalled top panel and put on new knobs.
total time was 10 minutes. if all repairs could be this easy i would change professions

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerRonald from Bliss NY

The inner ring behind the knob was cracked

I read all the other inputs before I started the job. It was a very simple repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Socket set

CustomerDonnie from Jefferson City MO

Will not spin or agatate

coil tested bad so i replaced,still had the same problem so I checked every thing couldn,t didn,t know what to do so I went on-line got ask.com. And e-mailed a repair man and he said that it was the curcuit board but he said I would have to purchase a new motor because they come together.So they both was bad.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4