Quick Question!

Have you ever purchased from PartSelect.com before?

239525-1-S-GE-WB27X10388        -Line Fuse
239525-1-S-GE-WB27X10388        -Line Fuse http://www.partselect.com/Schematics/GE/00125324i01.gif

Line Fuse

PartSelect Number PS239525

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • No heat.
  • Won’t turn on.
  • Touchpad does not respond.

Compare At

$12.84

You Save

$2.14

Your Price

$10.70
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

647 of 858 people found this instruction helpful

Parts Used:
  • Line Fuse
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Kim from Cliffside Park, NJ

Microwave completely stopped working

Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

134 of 216 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Steven from Manassas, VA

Microwave not heating

Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

59 of 108 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jacob from Brewster, NY

Some smuck put a metal object in company microwave

found fuse blown and heat damage to TCO sensor.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

48 of 109 people found this instruction helpful

Parts Used:
  • Line Fuse
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Ralph from Brandon, FL

I diagnosed the problem incorrectly: Based on a previous repair.

The old fuse is perfectly good. The new ones arrived within a day.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4