Models > 36363673200

36363673200 Kenmore Microwave - Overview

Get Parts and Repair Help for 36363673200

If you know the microwave repair part you need, you can browse the list of all parts on the 36363673200, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. We’ve also included any installation videos we have for 36363673200 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$5.43

Halogen Light Bulb - 120V 20W

Sold individually.

$6.62

FUSE

$3.84

RACK HOLDER

Sold Individually.

$8.11

Door Latch Assembly

This part is electrically designed for securing the door of the microwave while it’s in use.

$50.39

Glass Cooking Tray

There are two different couplers that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.

$24.01

Grease Filter - 2 Pack

$16.87

Primary Door Interlock Switch

This interlock switch is located in the door latch.

$3.00

Grille Clip

Sold individually.

$7.27

Wave Guide Cover

$7.27

Mounting Bolts - 3 Included

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave completely stopped working

  • Customer: Kim from Cliffside Park NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 315 of 417 people found this instruction helpful
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove an... read more

Under the vent light bulbs needed to be replaced

  • Customer: Robert from Naples ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 33 of 42 people found this instruction helpful
Turned of f the circuit breaker to the microwave. Unscrewed the cover (1 screw!) popped out the old bulbs and plugged in the new ones, using the bubblewrap as a handle to be sure my skin didn't touch the light bulbs so the oil from my hands didn't damage or shorten the life of the new bulbs. Turned the circuit back on. That's it! read more

One of the two plastic latches broke off, disabling my microwave

  • Customer: Dennis S. from Fremont OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 21 of 23 people found this instruction helpful
I have a GE Advantium/micorwave oven. It is the model that has the hinges on the side, NOT the bottom. First, removing the door is necessary. The grill has to be removed first, then the door lifts right out. Next the plastic backing on the door has to be very carfully taken off to expose where the new latch has to be placed. Use a flat screw driver or pu... read more