***NOTE: The wiring could be different than the original part and this part will need to be installed by an appliance repairperson.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric.
Part# WB27T10230 replaces these:
AP2632972, 824202, 191D2818P002
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven "control board" went dead so oven & digital readouts weren't working.
First we pulled the range away from the wall and unplugged it. Then took off the top back panel, disconnected the color coded wires, unscrewed the board and removed it. Then we unpeeled the "face" from the old board and stuck it on the new one, screwed the new one into place, reconnected all the wires and screwed the panel back on. The
... Read more oven is working just fine and in time for cooking the Thanksgiving turkey! Ordering the part was a breeze--one of the easiest websites I've ever used. Thank you!
Read less
Patricia from Pensacola, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
18 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
January 20, 2022
can this be calibrated to get accurate oven temp? The one i got is 25 degrees off on the high side
For model number WB27T10230
Hello Daniel, Thank you for your inquiry. The board is usually pre-calibrated by the manufacturer at the factory but we have included a link to our article on calibrating ovens. https://www.partselect.com/blog/how-to-calibrate-an-oven/ We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
JEROME
December 1, 2023
BAKE PUSH SWITCH ON CONTROL PANEL HAS TO BE PUSHED SEVERAL TIMES TO GET IT TO WORK
For model number J BP69BDH1BB
Hi Jerome,, Thank you for reaching out. This could be an indication the Oven Control, PartSelect Number PS238549 behind the touchpad is faulty and may need to be replaced. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.