2330889-1-S-Frigidaire-134844470-Knob
2330889-1-S-Frigidaire-134844470-Knob 2330889-2-S-Frigidaire-134844470-Knob 2330889-3-S-Frigidaire-134844470-Knob http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/9046CVPO.gif

Knob

PartSelect Number PS2330889

This knob includes tension spring clip and will accept a D-shaped shaft. Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Will Not Start.
  • Timer will not advance.
  • Touchpad does not respond.
  • Compare At

    $9.79
  • You Save

    $1.63
  • Your Price

    $8.16
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 27 reviews What's this?
1-5 of 27
 

467 of 471 people found this instruction helpful

Parts Used

  • Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerClint from Mobile, AL

Knob's plastic hub broken

selected correct replacement knob. used small screw driver to remove small black metal sleeve from switch shaft. (had left that in place to be able to turn on dryer with needle nose pliers while waiting on knob). aligned flat of new knob with switch shaft and gently pressed into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

369 of 372 people found this instruction helpful

Parts Used

  • Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerCynthia from Athens, GA

Dryer start knob broke

Googled dryer start knob, Part Select was second site I clicked on, found within 1 min, part was inexpensive, easy to order, arrived quickly and fit perfectly. Excellent online ordering experience.

Help other customers find the most helpful instructions.

Were these instructions helpful?

94 of 166 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerGreg from Lampasas, TX

Knob craked and broke off the start switch

Removed all the knobs but the master washing machine control knob, then the control and cover panels by removing the two screws that held each one. Then removed the end plastic pieces to allow access to screws holding the switch onto control panel. Used pliers to pull wires off the old switch and put them back on new switch. Screwed it back in place and re-attached plastic end pieces. Re-attached the control panel, then the cover panel under the control panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

89 of 151 people found this instruction helpful

Parts Used

  • Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerHeidi from Lakewood, CO

Knob on dryer broke

It is just a knob that starts the dryer. The knob is rather large, but it turns on the dryer. No tools needed. It took 5 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?

78 of 140 people found this instruction helpful

Parts Used

  • Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerAnthony from San Diego, CA

Too much force was applied to my knob and it broke.

The cat was not used for mechanical advantage. Rather he was present for worker's safety regulations. He is a bit of a tool though.

Firstly, I removed the knob from the packaging. Secondly, I stuck it on the peg.

I am not a professional repair person and do not condone or recommend any of the methods used during this repair procedure. The views and opinions expressed in this repair story are for entertainment purposes only.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 27