WAVE GUIDE WB06X10254
Fits your JE1590S!
★★★★★
★★★★★
Rated by 2 customers
Really Easy
Less than 15 mins
Ratings submitted by customers like you who bought this part.
Fits your JE1590S!
PartSelect Number PS227965
Manufacturer Part Number WB06X10254
Manufactured by
GE
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB06X10254 replaces these:
AP2623294, 874356, WB6X10254
Customer Reviews
Average Rating:
1 Review
★★★★★
★★★★★
5.0
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Barbara K - July 20, 2018
Verified Purchase
Replacing Wave Guard
I had a problem with my microwave and looked on You Tube to see that the wave guard needed replaced. I found the number on the microwave and ordered it. It came in just a couple days, wrapped so it wouldn't bend and it fit perfectly. I am so pleased with my purchase!!!
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 2 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace Lamp Bulb in GE Profile Microwave
First went to Sears & got 'Security Torx' screw driver set for 8.99. Got set of 6 drivers that will fit on drill , this is what will open bottom 2 screws on rear of Microwave. The other screws on the microwave are Phillips head screws.
Then Unplug Unit put on firm surface and go to rear & side of unit & take off only screws on t ... Read more he perimeter of the case. Then take off screws on side of case. (only 1 side has screws) Then make sure you discharge your static electricity by touching some metal or using a grounding wire device (most of us Computer Tech's have). Then gently slide case off from under front tabs. Looking at the right side of the Microwave (front facing) you will see a plug sitting up with two screws. You will not see the bulb as it is inserted upside down in a cover which shields it. The bulb will have a 2 wire attachment shielded by a electric cable attachment. If you don't see it immediately, refer to the schematic under your case or refer to the diagram on this web site carefully. The bulb is there in plain view. After removing the two screws and re- attaching the power cable to the bulb. Re slide on the case cover and replace the screws. I kept my security Torx screws in place in case I ever need to go to a repair person for more serious service then replacing a bulb.
Then Unplug Unit put on firm surface and go to rear & side of unit & take off only screws on t ... Read more he perimeter of the case. Then take off screws on side of case. (only 1 side has screws) Then make sure you discharge your static electricity by touching some metal or using a grounding wire device (most of us Computer Tech's have). Then gently slide case off from under front tabs. Looking at the right side of the Microwave (front facing) you will see a plug sitting up with two screws. You will not see the bulb as it is inserted upside down in a cover which shields it. The bulb will have a 2 wire attachment shielded by a electric cable attachment. If you don't see it immediately, refer to the schematic under your case or refer to the diagram on this web site carefully. The bulb is there in plain view. After removing the two screws and re- attaching the power cable to the bulb. Re slide on the case cover and replace the screws. I kept my security Torx screws in place in case I ever need to go to a repair person for more serious service then replacing a bulb.
Read less
Other Parts Used:
-
lenwood from Ruther Glen, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
28 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave caught on fire
I forgot to place my dish in the mircowave and it ran for a few minutes, sparked and started on fire. I thought the whole mircowave was going to need to be replaced, however a repairman told me with just a part replacement, I didn't need a new microwave. I could do it myself and save a $75.00 housecall. I checked on line for the part h
... Read more
e recommended and the parts were much cheaper through Parts Select than the GE website. It was a very simple repair. I unscrewed the old part and put in the new one. It took less than 5 minutes.
Read less
Other Parts Used:
-
rebecca from Peorai, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michele
October 17, 2019
I have a GE profile microwave and i would like to order this part, it is called the wave guide serial #fv300795k. I am hoping this is the right part.
For model number PEB1590DM2WW
Hi Michele, this is the compatible part for your model. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS227965
Manufacturer Part Number: WB06X10254
Manufacturer Part Number: WB06X10254
Brand
Model Number
Description
Back to Top
WAVE GUIDE
$
14.76
On Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.