http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/52787.gif
See part 22 in the diagram

Wheel Mounting Strip Only - NO Wheels

PartSelect Number PS2099474

Strip only. Wheels NOT included.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $23.87
  • You Save

    $3.98
  • Your Price

    $19.89
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Mounting Strip Wheel

Part Number 2099507

This wheel is sold individually.

$3.76
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
1-15 of 26
 

63 of 125 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerShaveta from Sterling VA

Electric range oven's element wouldn't heat up and dishwasher's upper rack wont roll out

The sketches on PartSelect.com were very-very helpful, in picking up the parts to order and also while fixing the parts.

For oven range. First I removed the two screws that hold the flat top in place and lifted the flat top. I then unscrewed the two screws that holds the element kit. Disconnected the three wires, and replaced the broken element with the new one. All done.

For dishwasher, just snapped the parts in and all set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 24 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerWanda from Bay Shore NY

Loose top basket/

I had two problems with the dishwasher. The top basket was loose, but the main problem was a plastic part inside the bottom assembly.

The part was backordered, so I re-ordered it through Sears. They said it would arrive in two days. Theirs came in two weeks, and their customer service was terrible.

Your "backordered" part came in two days, even before it was supposed to come had the part not been back ordered. I am delighted with your customer service and your company.

The illustrations on your website were excellent. They helped us not only to identify the part, but to diagnose the problem.

This was my first purchase through your company and if I ever need parts again, there is absolutely no reason to go anywhere else.

You have an excellent company, and great website! I bookmarked your page for future purchases.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnn from Grand Rapids MI

Snap tabs for wheels on original part broken - resulting in the top rack being loose on one side and falling down when you touched it.

I aligned the V-shaped tabs on the inner side of the part with the slots in the mating part and simply pulled the old part out (it was already disengaged from the wheels in the metal rail). I then inserted the new part into the slots. One side went in well, but the other side required the part to be bowed slightly to match up the V-shaped tab with the slot. Then the hard part was getting the wheels in position to snap them on. Once in position, it took a bit of effort to engage the snaps in each wheel. I was afraid of breaking the new part. These snaps are very stiff and even with the notch between them there isn't any give, but I was able to apply enough constant, steady pressure to finally get them to snap in without breaking.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGregory from Holt MI

Upper rack falling out of slide rail

No Tools Required! unclip the end caps of the slide rails, slide the upper rack out of the dishwasher. Remove the broken Wheel Mounting Strip from the rack and replace with the new unit. Re-assemble the rack into the dishwasher and re-fasten the end caps. Don't forget to get the appropriate accolades from your spouse!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerJohn from Gibsonville NC

Whell mounting plate on upper rack snapped in two.

I brought the rack to my computer and pulled up your diagram. It was relatively easy to follow the diagram to install the parts. They didn't need any tools, just snap them in place. Wife factor, very high, she can now use the dishwasher again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Houston TX

Right side roller of upper basket kept coming off track because one of the 2 wheels was broken which came with the replacement strip. The plate was also broken and replaced to hold the strip in place. Easy fix.

Simply took old parts off and replaced them with new parts - no tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerRichard from Newton NJ

Mounting wheel broken

Take old wheel off and snap on new wheel-very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

Customerkenneth from lompoc CA

My 22 year old son got drunk lost his footing and fell on top tray ,breakingwheels and mounting hardwear

The side that was broken,the wheels mounted to the tray itself not brakets so to keep cost down I had my wife buy parts to match otherside (two clip-on brakets,slide bar and wheels)and costom fit to the broken side which made the wheels to far from the slide-rail on the inside wall of the dishwasher so i spaced both side-rails out from the innerwalls withthe write size washers to make the slide-rails work,it will give us at least two to four more years of use unless someone falls on it again (I'm a 53 year old carpenter of thirty years and always have think ahead this time it worked,made my wife happy and saved my son money $$)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from San Ramon CA

Upper rack sagging from broken wheel mount

Removed the white mounting strip on the right side of the upper dishwasher rack by aligning the v-shaped slot. Note that one slot that's aligned with the "v" and push that part through the slot. It will take a slight downward twist to align the second slot, then push that slot downward as well.

I popped the mounting strip from the wheels (the front mount on the mounting strip was damaged to it came out easily). Put the mounting strip back in through the "v" slots (reversing the above direction starting with the slot that aligns at a slight angle first), then snapped the wheels back into the mounting strip.

One note when ordering is that the picture shows the strip with wheels, but the strip came without wheels. Fortunately, the existing wheels worked OK, but be aware that you should order the wheels separately if they're damaged as well.

No tools required and the only tricky part was figuring out now to get the "v" in the mounting strip aligned with the slots (and doing it in the right sequence.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJohn from Mission Viejo CA

Upper rack mounting wheel broken

The entire repair took less than a couple of minutes, and I'm not very mechanical. It was easy. I used a screwdriver to pry open the cap at the end of the upper rack's rail. Removed the rack. Attached the new pieces (simply snapped them on). Then, I put it all back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMARC from ST LOUIS MO

It was nice to know that anyone can get on the internet and look up your company and order a part and have it here in less than three days.. the part was the correct one and went on very easily.. thank you for your help

Sanpped off the old parts and snapped on the new ones.. very easy..

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAjit from GLendale Heights IL

Dishwasher rack was broken

I simply snapped off the old pieces and snapped on the new ones...Couldn't have taken more than 5 minutes. AMAZING selection of parts...HIGHLY RECCOMEND THIS WEBSITE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Winchester VA

The top rack had one of the wheels came separated from the wheel mounting strip

It was very easy, I just took out top rack got the old mounting strip, which just pulled right out. At that point I put the Mounting Strip right in, which fit like a glove then popped the wheels back on ! I then put the rack back in and secured it and pushed the rack in and Voila! Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Wheel Mounting Strip Only - NO Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMarv from Corvallis OR

Wheel mounting stud broken

The upper basket is designed for easy disassembly. I removed the upper basket, removed the wheel mounting strip from the basket, removed the wheel from the broken stud and the wheel from the unbroken stud (had to break the stud in the process), pressed the wheels onto the new strip, and reassembled the mounting strip to the basket. Put the basket back into the dishwasher. The only difficulty I had was pressing the wheels onto the studs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura from Kensington MD

Top rack would not slide out easily and looked ready to fall down.

We followed the video instructions for removing the guide rail stops. That allowed us to pull out the top rack. We then followed the video instructions for removing the old mounting strip, put the new wheels on the new strip, and put the new strip in place. Then we re-installed the top rack and put the guide rail stops back. We ordered new rails stops just in case the old ones were brittle and broke when we removed them, but we didn't have any difficulties. Total cost - just the parts. Much more convenient and less expensive than requesting a non-warranty service call, waiting for someone to show up, and then paying the price for the call and the marked-up parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 26