Quick Question!

Have you ever purchased from PartSelect.com before?

11747643-1-S-Whirlpool-WP99002073-Wheel Mounting Plate
11747643-1-S-Whirlpool-WP99002073-Wheel Mounting Plate 11747643-2-S-Whirlpool-WP99002073-Wheel Mounting Plate 11747643-3-S-Whirlpool-WP99002073-Wheel Mounting Plate http://www.partselect.com/Schematics/Maytag/52787.gif

Wheel Mounting Plate

PartSelect Number PS11747643

This wheel mounting plate is four inches long.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$5.81

You Save

$.97

Your Price

$4.84
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 7 reviews What's this?
1-7 of 7
 

3 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools:
Customer: John from Gibsonville, NC

Whell mounting plate on upper rack snapped in two.

I brought the rack to my computer and pulled up your diagram. It was relatively easy to follow the diagram to install the parts. They didn't need any tools, just snap them in place. Wife factor, very high, she can now use the dishwasher again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from Houston, TX

Right side roller of upper basket kept coming off track because one of the 2 wheels was broken which came with the replacement strip. The plate was also broken and replaced to hold the strip in place. Easy fix.

Simply took old parts off and replaced them with new parts - no tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: kenneth from lompoc, CA

My 22 year old son got drunk lost his footing and fell on top tray ,breakingwheels and mounting hardwear

The side that was broken,the wheels mounted to the tray itself not brakets so to keep cost down I had my wife buy parts to match otherside (two clip-on brakets,slide bar and wheels)and costom fit to the broken side which made the wheels to far from the slide-rail on the inside wall of the dishwasher so i spaced both side-rails out from the innerwalls withthe write size washers to make the slide-rails work,it will give us at least two to four more years of use unless someone falls on it again (I'm a 53 year old carpenter of thirty years and always have think ahead this time it worked,made my wife happy and saved my son money $$)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: John from Mission Viejo, CA

Upper rack mounting wheel broken

The entire repair took less than a couple of minutes, and I'm not very mechanical. It was easy. I used a screwdriver to pry open the cap at the end of the upper rack's rail. Removed the rack. Attached the new pieces (simply snapped them on). Then, I put it all back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: MARC from ST LOUIS, MO

It was nice to know that anyone can get on the internet and look up your company and order a part and have it here in less than three days.. the part was the correct one and went on very easily.. thank you for your help

Sanpped off the old parts and snapped on the new ones.. very easy..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dawn from Glencross, SD

Wheel mounting strip was warped. So we ordered the mounting plate and new wheels.

It was so easy! No tools needed, just pop out and replace exactly like you took it apart!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 28 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Timothy from Palm Beach Gardens, FL

Rack and spray unit damaged by accidental fall of guest

R & R parts....good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7