Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Crystal B - March 24, 2018
Verified Purchase
easy repair
The part we have been searching for we found it through your company. We couldn't get any where else. Thank you!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
burner would not work
slide stove out unplugged it took six screws out put new one in transfered wires pluged back in and it works thank you
David from Bellefonte, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A switch on a front burner went out
I first removed the back panel that covers the switches from back of stove; then I removed the wires and put them on the same numbered wires on the new switch; put the new switch in place with the wires connected to it; installed the 2 front screws and put the back cover on again & it took about 10 min and saved about $300.
thomas from South Bend, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
5 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Annette
June 13, 2019
Right front 8" burner lites but I can't control it. It stays on high all the time.
For model number 35DA-8W
Hello Annette, Thank you for the question. This normally indicates the switch that controls the element is defective and needs to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Annette
June 13, 2019
Right front 8" burner lites but i can't control it. It stays on high all the time.For model number 35da-8w
please can i have the part # i need to fix this?
For model number 35DA-8W Magic Chef
Hello Annette, thank you for writing. You will want to consider either the Surface Burner Receptacle Kit part PS1570190 or the 8" Economy Y-frame Surface Unit part PS11757466 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.