Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 28FA-7CXW-19

28FA-7CXW-19 Magic Chef Range - Overview

Get Parts and Repair Help for 28FA-7CXW-19

If you know the range repair part you need, you can browse the list of all parts on the 28FA-7CXW-19, or you can search by name or part description. You can also find your part by where it is located on the 28FA-7CXW-19 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 28FA-7CXW-19 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 6 hrs and your part ships today!
$8.90

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

Order within the next 6 hrs and your part ships today!
$22.26

SWTCH-LITE

Order within the next 6 hrs and your part ships today!
$52.81

Oven Door Gasket

Order within the next 6 hrs and your part ships today!

Latch Lever Clip

$164.98

THRMST-OVN

Order within the next 6 hrs and your part ships today!

Lamp Retainer Gasket

Broil Element (15" long x 12" wide)

This oven broil element with push on terminals can be used with some electric ranges or ovens. It comes with four screws and an instructions sheet. This element also has a terminal depth of three inches and a total element length of eighteen inches.

Door Handle

Drawer Glide

It is used with a range's runner to help the drawer glide in and out easily.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 137 of 148 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Inner Oven Glass broken

  • Customer: David from Wayne, NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 32 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 55 of 126 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more