2035480-1-S-Whirlpool-33001621-Timer Dial Skirt
2035480-1-S-Whirlpool-33001621-Timer Dial Skirt 2035480-2-S-Whirlpool-33001621-Timer Dial Skirt 2035480-3-S-Whirlpool-33001621-Timer Dial Skirt http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55274.gif

Timer Dial Skirt

PartSelect Number PS2035480

This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.
  • Will not shut off.
  • Shuts off too soon.
  • No heat or not enough heat.
  • Compare At

    $16.97
  • You Save

    $2.83
  • Your Price

    $14.14
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Timer Knob

Part Number 2019688

This part does not come with the top insert cap or the dial skirt.

$15.41
In Stock

Timer Knob Insert Cap

Part Number 2019693

This part is all white in color and is made of plastic.

$6.21
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 80 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Timer Dial Skirt

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerLinda from Rancho Cucamonga, CA

Timer dial broke off when turned

I pried the middle knob (grey) from the old dial skirt with a butter knife. When the new dial skirt arrived I popped the old knob into the new dial skirt. There was a metal flange (?) on the timer stem and I pulled that off with small pliers and then installed the repaired knob. And WOW! - it worked

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Timer Dial Skirt

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMargaret from Kenmore, NY

The timer dial skirt on the dryer broke again!

You just needed to pull of the knob straight towards you.
Then you separate the skirt from the knob and ring by pulling them off.

You put the knob and ring onto the new timer dial skirt. Line up the skirt and push it back onto the timer arm.

Still Part-select makes it easy to find a replacement part and gives good instruction on how to repair the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerWAYNE from PHILADELPHIA, PA

Door would not lock, knob broken

called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Timer Dial Skirt

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customeralexes from palmdale, CA

Timer dial know broken

All you have to do is remove the skirt on the bottom of the turning dial, then put on the new one. Then slip it on the machine. Bobs your uncle!!! You have a working knob for your Maytag Dryer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Timer Dial Skirt

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerNina from Roseville, CA

Dryer wouldn't heat! Thought it was dead! Oh no it was christmas!

We discovered that the dial "skirt" had cracked so the "pointer" didn't line up. Got the new skirt, pulled the old one off, had to get pliers to pull one small broken part off. Slipped the new skirt on and the dryer works like new. All for less than $5.00. Christmas was saved!

Help other customers find the most helpful instructions.

Were these instructions helpful?