Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LDE5916ADE

LDE5916ADE Maytag Dryer - Overview

Get Parts and Repair Help for LDE5916ADE

If you know the dryer repair part you need, you can browse the list of all parts on the LDE5916ADE, or you can search by name or part description. You can also find your part by where it is located on the LDE5916ADE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for LDE5916ADE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.85

Drum Support Roller Kit

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and is recommended to change both at once.

Order within the next 6 hrs and your part ships today!
$13.98

Tumbler and Motor Belt

At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and it is made entirely of rubber.

Order within the next 6 hrs and your part ships today!
$14.68

Front Glide Kit

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. Also, a rivet tool is required for this kit -...

Order within the next 6 hrs and your part ships today!
$6.20

Roller Shaft

This roller shaft acts as the axel for the drum roller. Also known as drum roller axle.

Order within the next 6 hrs and your part ships today!
$15.05

Blower Wheel with Clamp

This comes with a metallic hub clamp to hold it firmly in place.

Order within the next 6 hrs and your part ships today!
$11.99

Lint Filter

This filter collects lint as it passes through the dryer vent.

Order within the next 6 hrs and your part ships today!
$15.38

Timer Dial Skirt

This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.

Order within the next 6 hrs and your part ships today!
$5.15

Retaining Ring

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.

Order within the next 6 hrs and your part ships today!
$5.17

Drum Roller Shaft Washer

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

Order within the next 6 hrs and your part ships today!
$11.20

Idler Pulley Wheel

This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The blower fan (nylon) stripped off the motor shaft (steel)

  • Customer: Stephen from Lafayette, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 520 of 520 people found this instruction helpful
Removed the front cover (screws on bottom 0f face)...removed blower cover....spring pliers to remove and install blower fan. the rest of the time was spent cleaning the inside of the shell as well as the vent. Reassembled and dryer runs better than it has for many years. read more

dryer squeeking

  • Customer: gerald from park city, MT
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 448 of 468 people found this instruction helpful
removed front panel,lifted top, removed drum and drive belt,remove old rollers and acc and instlled new and reinstalled dryer parts. read more

Belt broke on old machine.

  • Customer: John from Charlottesville, VA
  • Difficulty: Easy
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 446 of 550 people found this instruction helpful
1. Removed front of machine (2 screws at the bottom).
2. Removed 4 screws from inside the dryer, to take off the blower housing.
3. Removed 4 screws and took out the large metal piece which supports the drum at the front. Removed the drum.
4. Replaced the two rollers that support the drum in the rear. Cleaned the pins they run on, and oiled ve... read more