Surface Burner Infinite Switch

PartSelect Number PS2034630

This switch controls the stove top surface burner.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Cooktop element not heating.
  • Compare At

    $55.94
  • You Save

    $9.32
  • Your Price

    $46.62
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

10 of 14 people found this instruction helpful

Parts Used

  • Surface Burner Infinite Switch

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customererik from chester springs PA

The infinite switch controlling one of the range top burners failed.

1 - Turned off electricity to the cook top.
2 - Removed the range top from the cutout in the counter.
3 - Removed the smooth top by removing the screws around the perimiter of the smooth top.
4 - Removed the screws securing the corner closest to the dead switch.
5 - Removed the screws holding the channel, onto which the infinite switched were attached, to the frame of the cooktop base.
6 - Removed the dead switch by removing the screws that hold it to the channel.
7 - One by one move the wires from the old switch to the new one.
8 - Reversed the process, 6 - 5 - 4 - 3 - 2 - 1, to put the cook top back together.

All in all the part was an exact replacement and the repair went really well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Prior Lake MN

Amana cooktop dual burner switch burned out

Dual Switch Amana Part # 0309550 is no longer available. Opted for this part. YOU MUST ALSO GET KSWITCH KNOB AS OLD ONE WILL NOT WORK Both burners are on but who cares. Better than spending $800 on a new cooktop. Turn off power. Push up top from underneath or carefully pry up top with screw driver. Top has sticky seal around rim so may require a little force. Put short piece of wood pieces across each corner to hold cooktop up. Remove all screws from around edge. Remove ceramic top. DO NOT TOUCH BURNERS Remove 2 scres on each end of switch panel. In order to lift out you must remove 2 screws on frame corner and 2 screws THAT hold burner support on frame. You can then lift up switch panel. Remove 2 screws holding OLD switch to panel. Remove wires from switch. MAKE SURE YOU PUT NEW WIRES IN SAME POSITION AS OLD SWITCH. Reverse to reassemble. Carefully test the burners before putting on the cooktop. Remmber to turn off power before putting on cooktop. NOTE: CHECK ORIENTATION OF SWITCH (COULD BE 180 DEGRESS) OFF. MAKE SURE KNOB OFF POSITION IS CORRECT.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerJohn from Pride LA

Range burner control switch had a direct short. Burner would not heat up.

First I removed the two screws that held the switch in place and disconnected the five different wires to the device. Then I connected the five wires back in there same locations on the new part and placed it back into the mounting slot / hole. Then put the two screws back to hold it in place. Put the range's back cover back on and connected it back to the power supply box under the cabinet. Turned the breaker back on and turned the new burner knobs on high and got the red glow from the burners and the red indication lights from the range. Yeah, back in service just in time for Thanksgiving cooking. (Changed out 2 burner controls and replaced the hole covers on the switch knobs) Complete project. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3