Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AK2H36E2

AK2H36E2 (P1131559N) Amana Cooktop - Overview

Get Parts and Repair Help for AK2H36E2

If you know the cooktop repair part you need, you can browse the list of all parts on the AK2H36E2, or you can search by name or part description. You can also find your part by where it is located on the AK2H36E2 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the AK2H36E2

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.93

Electric Hole Cover

This hole cover is almost two inches in diameter. It fits below the surface burner knob of some ranges, and has a center hole just big enough for the knob's shaft.

$4.90

SCREW

$58.33

Surface Burner Infinite Switch

This surface burner infinite control switch is used for some ranges. It is a black and a metallic switch that is almost three inches long.

$3.57

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$4.90

SCREW

Dual Infinite Switch Knob

$29.87

Infinite Switch Knob - black

This infinite switch knob is just over two inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium low...

Control Knob

This control knob will accept a D-shaped shaft.

Surface Burner Control Switch

This dual surface burner infinite control switch is just under three inches long. Using 240 volts, this switch will operate at 15 amps.

SWITCH GAS

Common Symptoms of the AK2H36E2

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The infinite switch controlling one of the range top burners failed.

  • Customer: erik from chester springs, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 10 of 15 people found this instruction helpful
1 - Turned off electricity to the cook top.
2 - Removed the range top from the cutout in the counter.
3 - Removed the smooth top by removing the screws around the perimiter of the smooth top.
4 - Removed the screws securing the corner closest to the dead switch.
5 - Removed the screws holding the channel, onto which the infinite switched ... read more

Range burner control switch had a direct short. Burner would not heat up.

  • Customer: John from Pride, LA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 2 people found this instruction helpful
First I removed the two screws that held the switch in place and disconnected the five different wires to the device. Then I connected the five wires back in there same locations on the new part and placed it back into the mounting slot / hole. Then put the two screws back to hold it in place. Put the range's back cover back on and connected it back to the p... read more