2018557-1-S-Whirlpool-211125-Drive Belt
2018557-1-S-Whirlpool-211125-Drive Belt 2018557-2-S-Whirlpool-211125-Drive Belt

Drive Belt

PartSelect Number PS2018557

This rubber V-style drive belt drives a washer's transmission.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Burning smell.
  • Pumps but will not spin.
  • Unusual Noise.
  • Will not agitate.
  • Will not drain.
  • Spins slowly.
  • Shakes and moves.
  • Leaking water.
  • Compare At

    $15.68
  • You Save

    $2.61
  • Your Price

    $13.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Pump Belt

Part Number 2018556

This V-style pump belt is typically used with washing machines that use two belts. This belt is about 40.5" long and 3/8" wide. This pump belt helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

$16.97
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 40 reviews What's this?
31-40 of 40
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGlendora from Raleigh NC

The agitator stop working

My 13yr old son and I fixed the washer in about 5 minutes. It was very simple and easy to repair considering I had never done it before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drive Belt

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerTina from New Haven IN

Belt went bad

Being a single Mom with no mechanical background, it went very well. I followed the instructions which were very clear. I did it myself!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set, Wrench set

CustomerFrancisco from San Jose CA

Broken drive belt and cracked elbow connector for water drainage

Unplugged the power chord, disconnect the water lines and the drainage hose connected to the elbow. Created and cleaned a space to work, opened the top cover and the front panel to be able access to the elbow area to replace it with a new part, placed back the top cover and front panel. Installing the new drive belt at the bottom was surprisingly easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRay from Cool CA

Broken belt

Layed the machine on it'sback and put the 2 belts on the pulleys,Very easy ,when you know to put the machine on it's backside!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerPeter from Bernhards Bay NY

Squealing rubbing noise during all cycles

DISCONECTED WATER LINES. DRAIN LINE AND ELECTRIC PLUG. LAID WASHER ON ITS FRONT SIDE, FOUND BADLY WORN PUMP BELT. ROLLED OFF OF PULLEY,ORDERED NEW ONE. REPLACED WITH NEW BELT. NO COVERS TO TAKE OFF EVERYTHING EASY TO GET AT. PROBLEM SOLVED./

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerdominic from Weirton WV

Washer would not agitate.

Since my missus keeps her appliances like new, it behoves us to buy something of good quality when new. We did that. Now, after almost 20 years, the washer complained it needed new belts, which I complied. Tilted it up against the wall after pulling power cord. Removed both belts and replaced. Adjusted pump belt by loosening pump and then retightening. This is easy to get to by removing front (removing 2 philips screws). Piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAlfred from Queens Village NY

Burning smell

I viewed and followed the PartSelect Instruction Video. My only problem was reattaching the door after the hinges fell off.Everything fell into place as the video indicated. After I regrouped I was able to put the hinges back and then I was able to reattach the side panel very easily as the vedio indicated. Thanks for everything.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersanpit from centreville VA

No problem

someone helped me

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Drive Belt

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerKenneth from Crosby TX

Wife overloaded our washer and the belt started slipping. We didn't know that was the problem untill we pulled the washer out and looked at the bottom of the machine. There we found the drive belt old, dried out and cracked with burns where the belt was slipping. The slipping belt made it appear

I turned the washer over and slipped off the old belt and then slipped on the new. The motor was spring loaded making the pepair extremely easy requiring no tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoan from Big Bend WI

Burning smell comming from washer

Frist take off front of the washer, removed old belts and then put on the new. very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-40 of 40