Quick Question!

Have you ever purchased from PartSelect.com before?

11743016-1-S-Whirlpool-WP6-2011900-Brake Assembly
11743016-1-S-Whirlpool-WP6-2011900-Brake Assembly 11743016-2-S-Whirlpool-WP6-2011900-Brake Assembly 11743016-3-S-Whirlpool-WP6-2011900-Brake Assembly http://www.partselect.com/Schematics/Maytag/37314.gif

Brake Assembly

PartSelect Number PS11743016

This part aids in the spinning or agitating cycles.

This part works with the following brands: Maytag, International, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Pumps but will not spin.

Compare At


You Save


Your Price

Order within the next 4 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1

109 of 152 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: John from Spring Valley, CA

No spin. Pump working. Smell of burning rubber.

I determined that the spin bearing was bad and decided to replace the brake too. Placed the machine on its side and then removed the rubber cap, v-belt, screw, drive lug and pulley. Then used a chain-vise grip to turn the brake off with the aid of a 3 foot long pipe extender for leverage. Blocked up the tub to align the transmission and installed the new spin bearing, brake, pulley and drive lug. Adjusted the drive lug position to contact the ccw motion of the pulley at the point when I could just feel the brake pressure. Installed the screw and rubber cap. Replaced the drive belts. Tested and all works. Halleluah!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1