Transmission Lower Lip Seal Repair Kit Specifications
This transmission lip seal repair kit comes in two pieces: a red four inch long piece, and a black one inch long piece. Both pieces are made entirely of plastic. This repair kit comes with and instructions sheet and it is used for some washing machines.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Transmission Lower Lip Seal Repair Kit
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Norman M - July 6, 2023
Verified Purchase
Repair old warrior
Lucky to continue to find parts to keep stable old machine running thanks
★★★★★
★★★★★
Nicky C - April 28, 2020
Verified Purchase
Does not fit my washer
Does not fit my washer, need to reurn it.
★★★★★
★★★★★
David B - December 13, 2018
Verified Purchase
Good part
Old seal was a little tough to remove. With persistence, came out after 15 minutes of gentle prying with flat tip screwdriver. New seal went right in.
★★★★★
★★★★★
Chriss W - July 27, 2018
Verified Purchase
Washer not worth fixing
First check to see what was wrong was just the lower seal. Then upon tearing it apart the transmission had a bunch of water inside the transmission and all the reports said that it was not worth fixing because most of the inside of the transmission would be corroded. So the parts were sent back to Part Select.
★★★★★
★★★★★
James K - July 21, 2018
Verified Purchase
worked just fine
easy ordering. arrived on time. fit perfectly. Very satisfied.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oil leak from lower lip seal
I didn’t have special tool for brake but punch and hammer worked. Seal was easy to replace. Several videos online to show you how. It wasn’t worth it to tear apart the transmission and buy more parts/seals (if they were even available). But I didn’t know how much oil was in it. I drilled a hole in the side to somewhat check level and
... Read more added 80-90 gear oil. It was almost empty and added almost a quart. Used a self taping screw/bolt with gasket sealer to plug the hole. I got 34 yrs out of this washer. If it fails, oh well. Just hate to buy a new one that only last 10yrs if im lucky.
Read less
Anthony from CHESANING, MI
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine jumped around room when spinning
The washing machine would shake very loudly when spinning. Found red oil under machine. Asked experts, they said "buy new machine, not worth repairing transmission". replaced small oil seal and drilled small hole and added some transmission oil(auto) then sealed hole. replaced belt just because the other one was oil soaked.
... Read more />Works great, Like new, cheap fix under $20..
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carroll
November 5, 2017
Do you have a part number for the oil used in the transmission?
For model number LAT2600AAE
Hi Carroll, Thank you for the question. The Gearcase Oil is PartSelect Number PS347766. Good luck with the repair!