Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Clocktimer went out, why I don't know.
Turned off power and gas. took off top brace held on with four small phillips screws.Then pulled face plate loose from front of Clock/timer. Then removed four large phillips screws holding the brace for the Clock/timer.Then removed the second set of four screws from each corner of the Clock/timer and disconnected the power wire attached t
... Read moreo the clock/timer. Put in the replacement Clock/timer and backed out the way I got in replacing each part. Turned on power and gas and set the clock/timer clock and the oven and broiler both came on and works fine. So easy couldn't believe. The repair estimate was over $300.00. I did it for the cost of the Clock/timer, just under half the estimate. Thank you guys. Rosemary Gray
Read less
Rosemary from Glendale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Turner
December 11, 2017
I just recently replaced the igniter in my oven and it worked for a month or so and now the oven comes on every now and then, when you try to turn it on the clock timer won't display the temperature, it will show three lines then go back to the time mode and the igniter won't activate. My question is do you think replacing the clock/timer would solve the problem, I turned it on last night but this morning it would not work. Your help would be greatly appreciated, thank you!
For model number FGB24L2ABA
Hi Turner, Thank you for the question. It does sound like an issue with the Clock/Timer control Board. You can also test the igniter to make sure it is not defective. It should read 3.2 to 3.6 amps or produce 3.2 to 3.6 VAC at the oven safety valve terminals while the igniter is glowing. Anything below that woudl indicate a weak igniter. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jose
May 26, 2022
is this the digital read out
For model number FGB24L2ABB
Hi Jose,
Thank you for your question. Yes, this electronic control board carries the digital display. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
