Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jennifer
September 30, 2017
I just bought a new shield light lower. My old one melted because it's been resting on the bulb itself. It seems i need another part to attach this that's missing?? please identify how i can attach this shield correctly
For model number GSL25JFTFBS
Hi Jennifer,
Thank you for your question. There is a wire tie that helps attach this part into place. I have linked that part down below for you. Good luck with your repair.
I changed temp sen. A few years ago. Now freezer is working fine but the fridge is feeling a little warm especially top shelf where the inlet flap from freezer is. Do you think I should change both ff sen. And temp sen. Again.
For model number GSH25JFXBBB
Hi Tim, Thank you for the question. I would first make sure the inlet/damper is opening properly and allowing the cold air through. If the damper is working properly and the freezer is working, I suggest replacing the sensor in the Fresh Food Section.Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
